Chapter 4 Operation, Administration, and Maintenance
You only need the
Figure 4-2 on page 4-5 illustrates EIA/TIA-232 interface access and Ethernet access to the ONS 15252 MCU.
After you have assigned an IP address to the NCB module, you can also send information to the NCB module by file transfer protocol (FTP). Set the EIA/TIA-232 interface to the parameters listed in Table 4-1. Set the terminal settings to ASCII (send line end with line feed).
Table
Parameter | Value |
|
|
Speed | 19.2 Kbps |
|
|
Data Bits | 8 |
|
|
Parity | None |
|
|
Stop Bits | 1 |
|
|
Flow Control | None |
|
|
Cisco ONS 15200 Product Description
| ||
|