Chapter 3 Product Hardware
Physical Layout
Caution You must install the fan unit in a Release 1.0.1 shelf. Running the Release 1.0.1 shelf without the fan unit will result in a unit that is not compliant to any specifications, nor is warranted or supported by Cisco. In addition, such usage may result in equipment damage.
Caution Do not install the fan unit in a Release 1.0 shelf. Running the Release 1.0 shelf with a fan unit will result in a unit that is not compliant to any specifications, nor is warranted or supported by Cisco. In addition, such usage may result in equipment damage.
3.1.5 Fiber Organizer
The fiber organizer distributes the client
You can place the fiber organizer on the fan unit front. This placement does not interfere with fan unit filter replacement.
3.2 Physical Layout
This section describes the physical configuration of the ONS 15252 MCU and ONS 15201 SCU.
3.2.1 ONS 15252 MCU Physical Configuration
The ONS 15252 MCU physical configuration consists of a Network Control Board (NCB) module, Network Adaptation modules (NAMs), a Communication Interface module (CIM), Client Layer Interface Port (CLIP) modules, Hub Filter modules (HFMs), a pair of Line modules (LMs), and one Bridge module (BM) (see Figure
Cisco ONS 15200 Product Description
|
| ||
|
|