Cisco Systems ONS 15200 manual Communication Interface Module, Ons, Maximum

Page 52

Chapter 5 Module Descriptions

Communication Interface Module

optical signal to a specific International Telecommunication Union (ITU-T) G.692-compatible wavelength. The CLIP module then transfers the converted optical signal to the DWDM side of the ONS 15200 network.

When the CLIP module receives the optical signal from the DWDM side of the ONS 15200 network, the CLIP module converts the selected optical signal to the 1310 nm wavelength region and delivers it to the client layer. If the ONS 15200 system is optically protected (that is, the optical signal is carried on two routes), the CLIP module selects which optical signal to transfer to the client layer. You can install a CLIP module in either the ONS 15252 Multichannel Unit (MCU) or the ONS 15201 Single-Channel Unit (SCU).

When the CLIP modules are not installed, attach front covers for electromagnetic compatibility and electromagnetic interference (EMC/EMI) precautions.

Release 1.1 provides a new CLIP module that incorporates both clocked (3R) and unclocked (2R) data regeneration. You can set the mode of operation (2R or 3R) using the management interfaces. The new 2R/3R CLIP is fully compatible with the existing 3R CLIP. The 2R/3R CLIP is user configurable for unprotected or fiber protected operation.

In addition, Release 1.1 provides two dispersion tolerances: 1800 ps/nm at 0 and 7 dBm, and 3000 ps/nm at 0 dBm.

Restrictions exist for CLIP replacement based on whether you are using a plenum or a fan unit in the ONS 15252 MCU. Table 5-1identifies the CLIP restrictions.

Note CLIP replacement restrictions are related to mean time between failure (MTBF) performance and not NEBS-2 compliance.

Table 5-1 CLIP Restrictions

ONS 15252

CLIP

Maximum number

 

Maximum

Equipment

Version

of CLIPs

Restriction

temperature

 

 

 

 

 

2U plenum

3.2

16

None

25°C (77°F)

 

 

 

 

 

2U plenum

3.2

4

Slots 1 – 4

40°C (104°F)

 

 

 

 

 

2U plenum

3.5

2 (3.5)/14 (3.2)

Not adjacent

25°C (77°F)

 

 

 

 

 

2U plenum

3.5

3

Slots 1 – 3

40°C (104°F)

 

 

 

 

 

Fan unit

3.2 or 3.5

16

None

None

 

 

 

 

 

5.3 Communication Interface Module

The CIM allows you to extend the ONS 15252 MCU internal controller area network (CAN) bus to another ONS 15252 MCU or to an ONS 15201 SCU. Extending the CAN bus allows you to configure several network elements (NEs) into a larger functional unit. The CIM also provides the local craft interface to the Maintenance Manager software package, and the Electronic Industry Association/Telecommunication Industry Association (EIA/TIA) EIA/TIA-232 access interface to the ONS 15252 MCU via an EIA/TIA-232 cable. The CIM is installed in the ONS 15252 MCU. The CIM and the NCB module communicate using ONS 15252 MCU backplane.

Cisco ONS 15200 Product Description

5-2

78-13766-01

 

 

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Cisco ONS 15200 Product Description Corporate HeadquartersCisco ONS 15200 Product Description N T E N T S Alarms Acronyms A-1 Contents Cisco ONS 15200 Product Description 78-13766-01 G U R E S Viii NCB Indicators Tables Cisco ONS 15200 Product Description 78-13766-01 Manual Structure Related DocumentationObtaining Documentation Relevant StandardsWorld Wide Web Optical Networking Product Documentation CD-ROM Ordering DocumentationDocumentation Feedback Obtaining Technical AssistanceCisco.com Technical Assistance CenterCisco TAC Escalation Center Xvi Optical Channels Optical System DescriptionUnprotected Channels Protected Channels Unprotected channels in an ONS 15200 systemSoftware Configurable Protection Optically-fiber protected channels in an ONS 15200 systemPage ONS 15200 Network Configurations Bus ConfigurationRing Configuration Logical ConnectionsDual-Home Configuration Multichannel Point-to-Point ConfigurationRing Configuration with Hubbed and Meshed Traffic Full-Mesh Configuration Ring configuration with hubbed and meshed trafficFour ONS 15252 MCUs in a full-mesh configuration Network ProtectionModularity and Ancillary Equipment ONS 15252 MCUClip ONS 15201 SCU Fan Unit Power Distribution PanelStatus Cause Physical Layout ONS 15252 MCU Physical ConfigurationFiber Organizer Configuration of the ONS 15252 Multichannel Unit ONS 15201 SCU Physical Configuration Internal BUS Clip NAM Clip NCB HFMPower and Grounding Physical layout of the ONS 15201 SCUONS 15252 MCU Power and Grounding ONSEnvironmental Compliance Safety SpecificationsElectromagnetic Compatibility Wavelength Grid Product SafetyChannel Number Frequency THz Wavelength nm Page Network Control Network Management OverviewCisco ONS 15200 Product Description 78-13766-01 EIA/TIA-232 RS-232 Interface Hardware PlatformsParameter Value Speed Kbps Data Bits Parity None Stop Bits Flow ControlCommand Line Interface Ethernet interfaceMaintenance Manager MA interfaceWeb-Based Interface Internal Data BusONS 15252 MCU internal data bus extension ports Simple Network Management Protocol Interface AlarmsCisco Transport Manager Alarm Name Condition Name DefinitionAlarm Name Definition Page Overview Client Layer Interface Port ModuleEquipment Version CLIPs Restriction Temperature Communication Interface ModuleONS MaximumNetwork Control Board Module Network Adaptation ModuleStatus Bridge Module Collector Filter ModuleConnection Module Connection Module YLine Module Hub Filter ModuleTermination Module Page Operational Parameter Condition MaximumOptical Optical PerformanceOptical Frequencies Parameter Condition Minimum UnitIncludes Connectors Equipment Maximum dB Optical LossIncludes Equipment Maximum dB15201 SCU unprotected optical path 100/0 or 0/100 Environmental Parameter Condition Min Max UnitMechanical Parameter UnitsElectrical Parameter Max UnitAcronyms Control area network Electronic Industries Association International Electrotechnical Commission Internet protocol National Fire Protection Association Subnetwork Manager D E IN-2 IN-3 IN-4
Top Page Image Contents