Chapter 4 Operation, Administration, and Maintenance
Network Management Overview
An internal data bus, also called a controller area network (CAN) bus, connects an NCB module to different CLIP modules of the ONS 15252 MCU. You can extend this data bus over several
An overhead channel exists and is implemented as a base band modulation on the individual DWDM optical channels. Two
Any CLIP module controlled by an NCB must not be more than two QPP hops away from that NCB. If the CLIP is further away from the NCB, you must install additional NCB modules.
Release 1.1 allows you to configure up to two active NCBs as managers of any CLIP in a network. To manage the CLIP, it must be no further than two CAN and two QPP hops away from the NCB. Any NCB in a network that is not provisioned as an active manager of a CLIP can still inventory the CLIP.
Cisco ONS 15200 Product Description
|
| |
|