Message | Causes | Corrective Actions |
|
|
|
Timer chip | Faulty system board. | See "Getting Help" on |
counter 2 |
| page 133. |
failed. |
|
|
|
|
|
TPM | A Trusted Platform Module | Information only. |
configuration | (TPM) configuration |
|
operation | command has been entered. |
|
honored. System | The system will reboot and |
|
will now reset. | execute the command. |
|
|
|
|
TPM | This message displays during | Enter I or M to proceed. |
configuration | system restart after a TPM |
|
operation is | configuration command has |
|
pending. Press | been entered. User |
|
(I)to Ignore OR interaction is required to
(M)to Modify to proceed. allow this
change and reset the system.
WARNING: Modifying could prevent security.
TPM failure. A TPM function has failed. See "Getting Help" on page 133.
Unable to launch | System halted after F10 |
System Services | keystroke because System |
image. System | Services image is either |
halted! | corrupted in the system |
| firmware or has been lost due |
| to system board replacement. |
| The iDRAC6 Enterprise card |
| flash memory may be |
| corrupted. |
Restart the system and update the USC repository to the latest software to restore full functionality. See the USC user documentation for more information.
Restore the flash memory using the latest version on support.dell.com. See the iDRAC6 user's guide for instructions on performing a field replacement of the flash memory.
About Your System
31