Chapter 2 - Mounting Instructions | 10 |
Left Bracket Installation
Figure 5. Fastening the Left Bracket to the Rack
1.It is recommended that you mark on the equipment rack exactly where you want the top of the two mounting brackets to go on the device in order to make sure that they are level with each other. Once you have determined the desired location, fasten the left bracket to the rack using your own screws or clips, as shown in Figure 5.
•2 screws must be used to fasten the top of the bracket to the rack (using any two holes on the rack tab).
•At least 3 screws must be used to fasten the bottom of the bracket to the rack. One of the screws must be used to fasten the very bottom hole in the rack tab.