TAG 1000 manual Main, Moving Around and Making Selections

MIL-BOOK™

OPERATORS MANUAL

3.2.1 Main

This section describes the main items of the SETUP program. The SCU screen can be divided into four areas:

•On the top line of the screen is the menu bar, which lists the titles of the available menus. Each menu title contains a pull-down menu, which displays items for setting.

•The left column of the screen displays the current configuration information of the system. If an item in the pull-down menu is selected which contains multiple choices, the left column displays the submenu where you can make your selections.

•The right column of the screen gives help information of the selected item.

•The bottom lines of the screen give keyboard instructions for moving around and making selections.

3.2.2Moving Around and Making Selections

A brief description of keyboard usage is listed next:

Key	Function
←, →	Selects a menu title.
↑, ↓	Selects an item or option.
Enter	Opens or closes the options window when an item is selected.
Space bar,	Cycles through the pre-defined value for the selected item. Pressing the space bar brings
	up the next value; pressing the minus (–) key does the contrary.
Esc	1)	Exits the SCU program.
	2)	Returns to the previous menu if in a submenu.
	3)	Closes the options window if one is open.

Table 3-1 Keyboard Usage

NOTE: You are advised to use the touchpad or mouse (if installed), as it is more straightforward than using the keyboard.

- 3-2 -