MIL-BOOK™
OPERATORS MANUAL
Figure 3-14 Power-On Password
3.2.3.1System Password
Allows you to set the password for your system. When typing password, first make user that Num Lock is off, then type your password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable Password to
3.2.3.2Hard Disk Boot Sector
Sets if a warning message will appear when the hard disk boot sector (partition table) has been changed. A check mark ( ) indicates enabled, while an underline (_) indicates disabled. The default setting is disabled.
Figure 3-15 Hard Disk Boot Sector
CAUTION: sets this item to disabled before installing an operating system, running Fdisk or Format program. Otherwise, the intended action will fail.
-