Optibase quick start To add the required connections, To initialize MGW 2000e

MGW 2000e Quick Start Guide

To add the required connections:

1.Insert the MGW 2000e CD and navigate to the HyperTerminal Settings folder.

2.Copy rasphone.pbk to

C:\Documents and Settings\All Users\Application Data\Microsoft\Network\Connections\Pbk

on your PC. If Windows is not installed on C, specify the correct drive.

3.Restart your PC; the direct connection, called 2000e Direct Connection, is available under Network Connections in the Control Panel. We recommend creating a shortcut on the Desktop.

4.Use a serial cable and connect one end to the RS-232 connector and the other end to the Configuration PC's COM1 port.

5.Copy 2000e.ht to a local folder on your PC and create a shortcut on the Desktop.

6.Double-click 2000e Direct Connection , enter the user name and the password for MGW 2000e's Administrator user and click Connect.

7.Double-click 2000e.ht ; HyperTerminal appears with the MGW 2000e's Logon prompt.

To initialize MGW 2000e

1.Log on as Administrator; MGW 2000e initializes.

•If a network segment is DHCP enabled, TCP/IP settings are automatically defined for the associated NIC.

•If a network segment is not DHCP enabled, refer to page 8 to define TCP/IP settings for the associated NIC.

2.Press any key; the Main menu appears.

6