Optibase MGW 2000e quick start MGE-200D Encoding Module Interfaces

Page 24

MGW 2000e Quick Start Guide

Connectors	Description

ANALOG AUD	Connects analog audio source.
DIG AUD	Connects digital audio source.
SDI	Connects digital video source

LEDs	Description

Source	Off	Bad or no video source.
	Green	Video source detected.

Table 7: MGE-200D Encoding Module Interfaces

Cable	Description

Video BNC	Connects digital video source
RCA Coaxial	Connects digital audio source
Stereo MiniJack Audio	Connects analog audio source

Table 8: Cables connecting Sources to MGE-200D Encoding Modules

18

Image 24

Contents MGW 2000e Trademarks Safety Instructions When using MGW 2000ePage Page Page MGW 2000e Overview MGW 2000e Components Chassis Components DescriptionPower Supply Getting StartedUnpacking MGW 2000e Installing an Encoding Module in MGW 2000e User AuthorizationInitial Configuration Before you initialize MGW 2000eTo add the required connections To initialize MGW 2000eTo change MGW 2000e’s hostname If your Network is not Dhcp enabled To define TCP/IP settingsTo display TCP/IP settings To log off MGW 2000eIf you wish to log on again Transmitting Streams Logging on to MGW 2000e DirectorConfiguring a Live Channel Configuring Stream ParametersConfiguring Source Parameters Configuring a UDP Target Running a Channel To transmit a streamTo stop transmitting Previewing MPEG-1 UDP Streams To preview a MPEG-1 UDP streamHardware Overview LEDs DescriptionPorts Description MGE-200D Encoding Module Interfaces Page Page Software Updates Documentation Technical SupportOptibase Inc Warranty