MGW 2000e Quick Start Guide
Configuring a UDP Target
1.Click the Target tab; the Target page appears.
2.Select a UDP Target; UDP appears under Target Type.
3.Click Add Target; a default Multicast address is assigned and default parameters are set.
•Confirm that your receiving PC belongs to the displayed Multicast address, otherwise you won't be able to play the stream.
•Refer to your network administrator to obtain a valid Multicast address and enter it into the Target Address field.
4.To implement the settings, click Apply.
5.To return to the Channels list, click Channels in MGW 2000e Director’s menu.
For a detailed description of target parameters and instructions on adding and configuring targets other than UDP, refer to the user manual.
13