Optibase To display TCP/IP settings, To log off MGW 2000e, If you wish to log on again

Page 15

MGW 2000e Quick Start Guide

To display TCP/IP settings:

1.To display MGW 2000e’s TCP/IP settings, re-open the HyperTerminal connection and log on again as Administrator, the Main menu appears.

2.Type 3 (Display TCP/IP Settings); the TCP/IP settings are displayed.

3.To return to the Main menu, press any key.

To log off MGW 2000e:

1.In the Main menu, press 0 (Quit); you are notified that MGW 2000e will have to restart for the new settings to take effect.

2.Press any key; the connection is terminated and MGW 2000e restarts, which may take several minutes. MGW 2000e is available again when the Power LED turns green.

If you wish to log on again:

•Re-open the HyperTerminal connection and enter the user name and password for Administrator; the Main menu appears.

9

Image 15

Contents MGW 2000e Trademarks When using MGW 2000e Safety InstructionsPage Page Page MGW 2000e Overview Chassis Components Description MGW 2000e ComponentsPower Supply Getting StartedUnpacking MGW 2000e User Authorization Installing an Encoding Module in MGW 2000eBefore you initialize MGW 2000e Initial ConfigurationTo initialize MGW 2000e To add the required connectionsTo change MGW 2000e’s hostname To define TCP/IP settings If your Network is not Dhcp enabledTo display TCP/IP settings To log off MGW 2000eIf you wish to log on again Logging on to MGW 2000e Director Transmitting StreamsConfiguring Stream Parameters Configuring a Live ChannelConfiguring Source Parameters Configuring a UDP Target Running a Channel To transmit a streamTo stop transmitting To preview a MPEG-1 UDP stream Previewing MPEG-1 UDP StreamsLEDs Description Hardware OverviewPorts Description MGE-200D Encoding Module Interfaces Page Page Software Updates Documentation Technical SupportOptibase Inc Warranty