Optibase MGW 2000e quick start Warranty

Page 28

Warranty

Your Optibase product is warranted against defects in material and workmanship for a period of 12 months starting with the date of delivery. We will repair or replace (at our option) any part that proves defective during the warranty period, provided the entire unit is returned to Optibase by prepaid shipping in Optibase’s original packing.

Note that you are only eligible for warranty, if your MGW 2000e unit carries a serial number on its rear panel. Your dated sales receipt or invoice proves the date you purchased the unit. Before returning your product for repair, contact our Customer Service department for a Return Materials Authorization (RMA) number. No unit will be accepted for repair without RMA number.

Neither Optibase Inc. nor Optibase Ltd. will be responsible for any damages resulting from the use, maintenance or installation of any Optibase product. Neither Optibase Inc. nor Optibase Ltd. will be responsible for the incorporation of any spare or replacement parts not approved by Optibase. Without limiting the generality of the foregoing, Optibase reserves the right to refuse warranty repair on any product that, in our opinion, has been subjected to any abnormal electrical, mechanical, or environmental abuse, or shows signs of modification by an unauthorized person or company. To assure coverage under this warranty, you must fax your Warranty Registration Fax-Back Sheet to Optibase, within 30 days of purchase of the product along with a copy of your sales receipt. Call your local distributor or reseller for out-of-warranty repair charge estimates prior to returning a product.

Serial Number:

Date of Purchase:

Image 28
Contents MGW 2000e Trademarks Safety Instructions When using MGW 2000ePage Page Page MGW 2000e Overview MGW 2000e Components Chassis Components DescriptionGetting Started Power SupplyUnpacking MGW 2000e Installing an Encoding Module in MGW 2000e User AuthorizationInitial Configuration Before you initialize MGW 2000eTo add the required connections To initialize MGW 2000eTo change MGW 2000e’s hostname If your Network is not Dhcp enabled To define TCP/IP settingsTo log off MGW 2000e To display TCP/IP settingsIf you wish to log on again Transmitting Streams Logging on to MGW 2000e DirectorConfiguring a Live Channel Configuring Stream ParametersConfiguring Source Parameters Configuring a UDP Target To transmit a stream Running a ChannelTo stop transmitting Previewing MPEG-1 UDP Streams To preview a MPEG-1 UDP streamHardware Overview LEDs DescriptionPorts Description MGE-200D Encoding Module Interfaces Page Page Technical Support Software Updates DocumentationOptibase Inc Warranty