2 SafeCom Go Canon
2.6Display the Pull Print icon
On Canon imageRunner ADVANCE series the Pull Print icon is by default added to the bottom of the list and in some cases users will need to tap Show All on the printer’s control panel to see it.
To display bring the SafeCom Pull Print at the top perform these steps:
1.Login at the printer as a user with Administrator rights in SafeCom.
2.Tap the MEAP icon 
in the top right corner of the screen.
3.Tap Main Menu Button Display Settings.
4.Scroll to the bottom of the list and tap Pull Print.
5.Tap Up until Pull Print is at the desired position.
6.Tap OK.
2.7SafeCom Go Canon web interface
The SafeCom Go Canon web interface integrates into the structure and design of the Canon Embedded Web Server. The SafeCom Go Canon web interface consists of two parts, 1) a public part, namely the Information web page and 2)
a
2.7.1Log in to the SafeCom Go Canon web interface
1.Open a web browser and type in the IP address of the MFP in the address field followed by :8000/safecom.
Example: http://172.16.6.55:8000/safecom
Use of JavaScript (Active Scripting) must be enabled in the browser.
If a System Manager is defined (2.8.8) then enter System Manager ID and System PIN and click Administrator Login to access all the Canon web pages. Clicking General User Login instead will give limited access where it is not possible to control management settings and restart the Canon device remotely.
2.Click Configuration on the menu to access the SafeCom Configuration web page. Type admin for the user name, type your password (default is nimda) and then click OK. You have to enter this regardless if a System Manager is defined.
16 |