NCR 7156 manual Front Cover

Page 13

7156 Setup and User’s Guide

Chapter 2: Setting Up and Using the Printer

3.Open the front cover and remove the foam restraint.

4.Remove the cardboard support from the slip table.

5.Remove the ribbon cassette and cables from the box.

6.Save all packing materials for future storing, moving, or shipping the printer.

7.Complete the Installation report card and send it to NCR.

Caution: Remove the foam restraint and the cardboard support before operating the printer.

Front

Cover

4 3

September 1998

7

Image 13

Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Ordering Paper and Supplies Revision Record7156 Printer Receipt Station Features and OptionsSlip Station General FeaturesBoth Stations Options What Is in the Box? Setting Up and Using the PrinterRemoving the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Standard Operator Panel Turning On the PrinterLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Removing the Ribbon Cassette Putting In and Changing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Running the Print Test by Power Cycling the Printer Testing the PrinterRunning the Print Test by Opening and Closing the Cover Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Thermal Receipt Paper Ordering Paper and SuppliesOrdering Ribbon Cassettes Ordering FormsOrdering Documentation Ordering Other SuppliesOrdering Paper and Supplies