NCR 7156 manual Ordering Paper and Supplies, Ordering Thermal Receipt Paper

Page 33

7156 Setup and User’s Guide

Chapter 3: Ordering Paper and Supplies

Chapter 3: Ordering Paper and Supplies

Ordering Thermal Receipt Paper

The 7156 requires “fax grade” thermal paper with the following dimensions:

Diameter	Length	Width
80 mm max. (3.15 inches)	83 meters (273 ft.)	80 mm ± .5 mm (3.15 ± .008 inches)

The paper must not be attached at the core. Use paper with a colored stripe at the end to indicate that the paper is running low.

To order thermal receipt paper, contact your sales representative or order from

NCR at the following address or toll free number:

NCR

Media Products Division

9995 Washington Church Road Miamisburg, OH 45342

Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office

September 1998

27

Image 33

Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Ordering Paper and Supplies Revision Record7156 Printer Receipt Station Features and OptionsGeneral Features Slip StationBoth Stations Options What Is in the Box? Setting Up and Using the PrinterRemoving the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Standard Operator Panel Turning On the PrinterLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Removing the Ribbon Cassette Putting In and Changing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Testing the Printer Running the Print Test by Power Cycling the PrinterRunning the Print Test by Opening and Closing the Cover Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Thermal Receipt Paper Ordering Paper and SuppliesOrdering Ribbon Cassettes Ordering FormsOrdering Documentation Ordering Other SuppliesOrdering Paper and Supplies