7156 Setup and User’s Guide | Chapter 2: Setting Up and Using the Printer |
Choosing a Location
The 7156 printer takes up relatively little counter space and may be set on or near the host computer. Make sure there is enough room to open the receipt cover to change the paper and to open the front cover to change the ribbon cassette. The illustration shows the actual dimensions of the printer, but leave several inches around the printer for connecting and accessing the cables.
Note: The optional Magnetic Ink Character Recognition (MICR) check reader feature has been factory adjusted for a normal operating environment with a host computer. However, additional devices, such as CRT monitors, or large metal surfaces that are near the printer can affect the printer’s magnetic field, causing intermittent reading errors when the MICR check reader is in operation.
This condition can be easily diagnosed by checking the MICR check reader and adjusting it if the factory setting has been altered by your operating environment. See the Owner’s Guide for more information.
280 mm
(11.00 in.)
178 mm
(7.00 in.)
229 mm | 264 mm |
(9.00 in.) | (10.40 in.) |
347 mm
(13.70 in.)
September 1998 | 9 |