NCR 7156 manual Putting In the Ribbon Cassette

Page 23

7156 Setup and User’s Guide

Chapter 2: Setting Up and Using the Printer

Putting In the Ribbon Cassette

1.Tighten the ribbon by turning the knob in the direction of the arrow.

2.Position the ribbon cassette on the carriage and snap it into place. Be sure the ribbon is underneath the printhead.

3.Close the front cover.

1 2

Printhead

3

Front

Cover

September 1998

17

Image 23

Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Ordering Paper and Supplies Revision Record7156 Printer Receipt Station Features and OptionsBoth Stations General FeaturesSlip Station Options What Is in the Box? Setting Up and Using the PrinterRemoving the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Standard Operator Panel Turning On the PrinterLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Removing the Ribbon Cassette Putting In and Changing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Running the Print Test by Opening and Closing the Cover Testing the PrinterRunning the Print Test by Power Cycling the Printer Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Thermal Receipt Paper Ordering Paper and SuppliesOrdering Ribbon Cassettes Ordering FormsOrdering Documentation Ordering Other SuppliesOrdering Paper and Supplies