NCR 7156 manual Repacking the Printer

Page 14

Chapter 2: Setting Up and Using the Printer

7156 Setup and User’s Guide

Repacking the Printer

Review the illustrations on the previous two pages to pack the printer.

1.Place receipt paper between the receipt cover and the printhead for protection.

2.Remove the ribbon cassette, move the carriage to the right, and place the foam restraint between the left side of the printer and the carriage to protect the carriage.

3.Place the cardboard support on the slip table.

4.Place the printer in the plastic bag and foam pack, place the packed printer in the box and secure the box with packing tape.

5.If you are sending the printer to NCR for repair, call your NCR-authorized service representative for instructions on where to send the printer.

Be prepared to answer questions concerning shipping and billing.

8

September 1998

Image 14
Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Revision Record Ordering Paper and Supplies7156 Printer Features and Options Receipt StationBoth Stations General FeaturesSlip Station Options Setting Up and Using the Printer What Is in the Box?Removing the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Turning On the Printer Standard Operator PanelLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Putting In and Changing the Ribbon Cassette Removing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Running the Print Test by Opening and Closing the Cover Testing the PrinterRunning the Print Test by Power Cycling the Printer Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Paper and Supplies Ordering Thermal Receipt PaperOrdering Forms Ordering Ribbon CassettesOrdering Other Supplies Ordering DocumentationOrdering Paper and Supplies