NCR 7156 manual Turning On the Printer, Standard Operator Panel

Page 18

Chapter 2: Setting Up and Using the Printer

7156 Setup and User’s Guide

Turning On the Printer

On Line Button

On Line

Green LED

Paper Status

Red LED

Paper Feed Button

Standard

Operator Panel

On Line Button with Recessed Plunger

On Line

Green LED

Paper Status Red LED

Paper Feed Button

Alternate Version

Operator Panel

Note: The operator panel may differ from the standard version (left) depending on the model. On models matching the alternate version (right), use a paper clip or pointed object to press the plunger to put the printer on- or off-line.

1.Press the On Line button (or plunger) to put the printer on-line, if it’s not already on-line.

The printer goes through a self-test routine to ensure everything is working properly then “beeps.” The On Line light (green) comes on indicating the printer is on-line. When the printer has completed its “startup” cycle, it is ready to receive data.

If the On Line light does not come on, the Paper Out light or the LED on the slip table flashes, or the host computer indicates that there is a problem, see the 7156 Owner's Guide for more information.

2.Press the On Line button (or plunger) again to put the printer off-line.

Note: The printer receives power when the power supply is on even if the printer is off-line. To completely remove power, press the On Line button (or plunger) to put the printer off-line (On Line light is off), then unplug the power supply from the outlet.

12

September 1998

Image 18
Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Revision Record Ordering Paper and Supplies7156 Printer Features and Options Receipt StationGeneral Features Slip StationBoth Stations Options Setting Up and Using the Printer What Is in the Box?Removing the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Turning On the Printer Standard Operator PanelLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Putting In and Changing the Ribbon Cassette Removing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Testing the Printer Running the Print Test by Power Cycling the PrinterRunning the Print Test by Opening and Closing the Cover Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Paper and Supplies Ordering Thermal Receipt PaperOrdering Forms Ordering Ribbon CassettesOrdering Other Supplies Ordering DocumentationOrdering Paper and Supplies