NCR 7156 manual Setting Switches

Page 30

Chapter 2: Setting Up and Using the Printer

7156 Setup and User’s Guide

Setting Switches

A group of switches, called DIP switches, are used to set communication parameters for the RS-232C communication interface. The switches are located behind the front cover.

Note: The DIP switches are used for other functions. See the “Diagnostics” chapter in the Owner's Guide for more information.

Caution: The DIP switches are set at the factory to predetermined settings and should generally not be changed. If you must change the settings do so carefully to avoid changing other functions.

Before changing any of the switches, first run the print test to print out the current switch settings on the receipt. See “Testing the Printer” earlier in this book for instructions on running the print test and for a sample printout.

DIP Switch

Off On

Switch 1 is shown in the OFF position

Front of Printer

 

Reset

Front Cover

Button

Note: Switch 1 is shown in the Off position for reference.

Note: Some 7156 models may appear slightly different from what is shown in the illustration. The procedures are the same for all models unless otherwise noted.

24

September 1998

Page 29 Page 31
Image 30
Page 29 Page 31
Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Revision Record Ordering Paper and Supplies7156 Printer Features and Options Receipt StationGeneral Features Slip StationBoth Stations Options Setting Up and Using the Printer What Is in the Box?Removing the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Turning On the Printer Standard Operator PanelLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Putting In and Changing the Ribbon Cassette Removing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Testing the Printer Running the Print Test by Power Cycling the PrinterRunning the Print Test by Opening and Closing the Cover Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Paper and Supplies Ordering Thermal Receipt PaperOrdering Forms Ordering Ribbon CassettesOrdering Other Supplies Ordering DocumentationOrdering Paper and Supplies
Top Page Image Contents