NCR 7156 manual Putting In the Paper Roll

Page 21

7156 Setup and User’s Guide

Chapter 2: Setting Up and Using the Printer

Putting In the Paper Roll

Note: Tear off the end of the new roll so that the edge is loose.

1.Place the new roll in the bin with a little extra paper extending over the front. Be sure the paper unrolls from the bottom of the roll. Otherwise the paper will not be printed on because the thermal coating will be on the wrong side.

2.Close the receipt cover.

3.Remove the excess paper by tearing it against the tear-off blade.

In addition to the tear off-blade, some printers use a knife to cut the receipt.

1	2

3

September 1998

15

Image 21

Contents NCR 7156 Thermal Receipt Impact Slip Printer Disclaimer September Information to User Contents Ordering Paper and Supplies Revision Record7156 Printer Receipt Station Features and OptionsGeneral Features Slip StationBoth Stations Options What Is in the Box? Setting Up and Using the PrinterRemoving the Packing Material Front Cover Repacking the Printer Choosing a Location Connecting the Cables Bottom of the Printer Standard Operator Panel Turning On the PrinterLoading and Changing the Receipt Paper Removing the Paper Roll Putting In the Paper Roll Removing the Ribbon Cassette Putting In and Changing the Ribbon CassettePutting In the Ribbon Cassette Printing on Forms or Checks 2001 Validating and Verifying Checks Endorse Here Testing the Printer Running the Print Test by Power Cycling the PrinterRunning the Print Test by Opening and Closing the Cover Sample Print Test Setting Switches OFF Cleaning the Printer Ordering Thermal Receipt Paper Ordering Paper and SuppliesOrdering Ribbon Cassettes Ordering FormsOrdering Documentation Ordering Other SuppliesOrdering Paper and Supplies