Silex technology SX-200 user manual User’s Guide Windows Print Queue Configuration

Page 21

User’s Guide

Windows Print Queue Configuration

It is recommended to use the ExtendNet Connect for TCP/IP software for Windows printer port configuration (provided on the Print Server Installation CD). The Print Servers are also compatible with Windows standard TCP/IP port and LPR ports. If you are using the Windows standard TCP/IP port, the default port number is 9100. Perform the following steps to install and use ExtendNet Connect for TCP/IP:

1.Install the ExtendConnect IP Port Monitor by inserting the CD supplied with your print server and clicking on Install Software.

2.Select ExtendNet Connect Windows Printing, click on Next, click on ExtendNet Connect for TCP/IP, and then click on Install. Follow the on-screen instructions to complete this installation.

3.Install the printer driver software according to the documentation for the printer.

4.Click the Windows Start button, select Settings, and then Printers (Start, then Printers and Faxes if you are using Windows XP).

5.Right-click on the printer you wish to associate with the network port, and then select Properties.

6.If you are using Windows NT/2000/XP/2003, go to the Ports tab. If you are using Windows 95/98/ME, go to the Details tab, and then click on Add Port.

7.If you are using Windows NT/2000/XP/2003, highlight ExtendNet Connect IP Monitor, and then click on New Port.

8.If you are running Windows 95/98/ME, select Other, highlight ExtendNet Connect IP Monitor, and then click on OK. The search will begin for available print servers.

9.Highlight the print server you would like to create the port for, and then click on ADD.

10.Make sure the port you created is chosen, and then click on Apply. You are now ready to print.

Document #40181-420 Rev. A

21

Image 21

Contents User’s Guide SX-200SET NW CHannel SET NW AUTHtypeUser’s Guide SET Port U1 Nbuf ENable DIsable SET Power Window nnnn SH POP3 SH Smtp Product Overview Introduction Package ContentsUser’s Guide About This User’s Guide Windows System RequirementsOther Operating System Requirements User’s Guide Wireless Print Server Requirements User’s Guide Print Server Components Label Color State Status LED IndicatorsDefault Settings wired and wireless print servers Factory Default SettingsWireless Default Settings wireless print servers only Pushbutton FunctionsBefore You Begin Hardware InstallationUser’s Guide User’s Guide Verifying the Connection to the Printer Configuration Options Configuration and ManagementExtendView Utility Web Browser InterfaceConfiguration Console HP Web JetAdmin UtilityDocument #40181-420 Rev. a User’s Guide Telnet User’s Guide Windows Print Queue Configuration Macintosh Print Queue Configuration Configuring to Print Using TCP/IP OS Troubleshooting Printing ProblemsIntroduction Checking the Network Connection and Cabling Troubleshooting Windows ProblemsUser’s Guide Troubleshooting Network Configuration Problems User’s Guide Troubleshooting Wireless Configuration Problems Where to Get Help User’s Guide Returning Products Information for United States Users Appendix a Safety and Regulatory NoticesInformation for Canadian Users IC notice User’s Guide Declaration of Conformity FCCDeclaration of Conformity CE User’s Guide Information for European UsersAppendix B Updating Firmware User’s Guide User’s Guide Loading New Firmware Macintosh OS-X Network Commands Command console access informationTelnet Command Console Access Serial Port Command Console AccessSET NW ENC SH NW AuthSH NW ENC SET NW KEY#SH NW Mode SET NW KeyvalSH NW Speed SH NW RTS SET NW RTSSET NW Apden SH NW ApdenSET NW Certcn SH NW StatsSH NW Certcn SET NW CERTCN2SET NW Certexp SH NW CERTCN2SH NW Certexp SET NW CertkeySET NW Inap SET NW PWSH NW Inap SET NW RealmSET NW Wpagroup SH NW WpaautoSH NW Wpagroup SET NW WpapskSET NW DFS SH NW Iroam NW IroamSH NW DFS SET NW REGDOMainSET NW Wired Port CommandsSerial Port Commands SH NW REGDOMainSet serial port flow control to NONE, XON/XOFF, CTS, or DSR SET Port S1 SPeedSet serial port parity to NONE, EVEN, ODD, MARK, or Space Sets the data bits on the serial portEnable or disable bidirectional mode User’s Guide Parallel Port CommandsSET Port P1 BIDir Shows Port parameters Sample outputSET Port P1 Nbuf ENable DIsable Enable or disable PJL status initializationCL Port port JOB USB Port Commands Server Information CommandsSET SERVEr DEscription SET SERVEr NAmeSET Snmp SETCOMM1 SET Snmp SETCOMM2SH Serial SH SERVEr CO SH SERVErSH Snmp SH VErsionService Commands SET Servi service name IP SET Servi service name FRSSET Servi service name NAme SET Servi service name POrtString Commands SET IP ACcess TCP/IP CommandsUser’s Guide SH STRing stringnum SH FILtersSET IP Chksum SET IP FTP SET IP HttpSET IP LPD SET IP Tftp SET IP TCPSH IP Power Configuration CommandsUser’s Guide Firmware Update User’s Guide SH LOAd Shows the firmware update parameters Sample outputSET Default Other CommandsExit SH FreeSET Poweron SH PoweronSave Unprotect Netware CommandsSET Netw REscan SET Netw QServerSET Netw SErver CL Netw SErverEmail Printing Commands SET POP3 TImeout SET POP3 PAsswordSET Smtp ENable SET Smtp ADdressSH POP3 DLC / Netbeui CommandsSH Smtp SH DLCAppletalk Commands ExtendView Wireless Security ConfigurationKey Selection SH NW SET NW KEY# SET NW RTS SH NW Apden SH NW CERTCN2 SET NW Inap SH NW Wpagroup