Silex technology SX-200 user manual Key Selection

Page 73

User’s Guide

•WPA uses TKIP encryption.

•WPA2 uses CCMP encryption.

•WPA2-WPA uses CCMP for pair-wise encryption, but allows TKIP for group encryption.

Key Selection

If WEP encryption is selected, and the authentication mode is not an EAP (802.1x) mode, select the desired WEP key to be used, one through four.

WEP Key

These fields are ignored unless the encryption mode is 64 or 128 bit WEP. Enter up to 10 hexadecimal digits for 64 bit WEP, or 26 hexadecimal digits for 128 bit WEP.

Authentication Type

Choose type of authentication to be performed with the network access point, or with a peer unit in Ad- hoc mode.

User ID

Enter the logon user ID that the server uses to authenticate to the 802.1x-enabled network. The user ID and password must be in the authentication server database, and is used in TTLS, LEAP, and PEAP configurations. The default user ID is 'anonymous'. A realm defines a grouping of users. If a realm is required for your network, it is separated from the user ID by a '@' character. Realms make it easier to segregate user groups into independently administered databases, to apply policies on a user group basis, and to establish roaming agreements to name a few applications. The default realm if not specified is 'anonymous'. Realm is used with TTLS configurations, and sometimes with PEAP.

Password

Enter the logon password that the server uses to authenticate to the 802.1x enabled network. The user ID and password must be in the authentication server database, and is used in TTLS, LEAP, and PEAP configurations. The password may be a text string, or a string of hex bytes prefixed with '\x'. The default password is 'anonymous'.

Certificate Common Name

Enter the name of the certificate on the primary authentication server. If both of the

common names are set to null, all certificates are accepted. The default is null. Certificate common name is used in TTLS and PEAP configurations.

Certificate Root Key

Enter the authentication key used to verify the root certificate in the certificate chain provided by the authentication server. To set to null, leave this field blank. Certificate Root Key is used in TTLS and PEAP configurations. The Certificate Root Key can be extracted by clicking Browse and selecting the actual certificate if you don’t want to type it in manually.

Certificate Root Key Exponent

This value must match the authentication server certificate value. The default is 65537 (x10001). Certificate Root Key Exponent is used in TTLS and PEAP configurations. The Certificate Root Key Exponent can be extracted by clicking Browse and selecting the actual certificate if you don’t want to type it in manually.

Authentication Protocol

This field determines how the server authenticates itself to the 802.1x enabled network after an 802.1x session is established. The default is PAP. Sometimes referred to as inner-authentication protocol, it is used in TTLS and PEAP configurations.

Pre-Shared Key

If the PSK mode of authentication is selected with WPA (TKIP) or WPA2 (CCMP) encryption, the key value or pass-phrase entered here is used to initialize the session with the access point. If a key value is entered, it must be exactly 64 hex characters. A pass-phrase must be 8 to 63 displayable characters.

Document #40182-420 Rev. A

73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents User’s Guide SX-200SET NW CHannel SET NW AUTHtypeUser’s Guide SET Port U1 Nbuf ENable DIsable SET Power Window nnnn SH POP3 SH Smtp Product Overview Introduction Package ContentsWindows System Requirements User’s Guide About This User’s GuideOther Operating System Requirements User’s Guide Wireless Print Server Requirements User’s Guide Print Server Components Label Color State Status LED IndicatorsDefault Settings wired and wireless print servers Factory Default SettingsWireless Default Settings wireless print servers only Pushbutton FunctionsBefore You Begin Hardware InstallationUser’s Guide User’s Guide Verifying the Connection to the Printer Configuration Options Configuration and ManagementExtendView Utility Web Browser InterfaceConfiguration Console HP Web JetAdmin UtilityDocument #40181-420 Rev. a User’s Guide Telnet User’s Guide Windows Print Queue Configuration Macintosh Print Queue Configuration Configuring to Print Using TCP/IP OS Printing Problems TroubleshootingIntroduction Checking the Network Connection and Cabling Troubleshooting Windows ProblemsUser’s Guide Troubleshooting Network Configuration Problems User’s Guide Troubleshooting Wireless Configuration Problems Where to Get Help User’s Guide Returning Products Information for United States Users Appendix a Safety and Regulatory NoticesInformation for Canadian Users IC notice User’s Guide Declaration of Conformity FCCDeclaration of Conformity CE User’s Guide Information for European UsersAppendix B Updating Firmware User’s Guide User’s Guide Loading New Firmware Macintosh OS-X Network Commands Command console access informationTelnet Command Console Access Serial Port Command Console AccessSET NW ENC SH NW AuthSH NW ENC SET NW KEY#SET NW Keyval SH NW ModeSH NW Speed SH NW RTS SET NW RTSSET NW Apden SH NW ApdenSET NW Certcn SH NW StatsSH NW Certcn SET NW CERTCN2SET NW Certexp SH NW CERTCN2SH NW Certexp SET NW CertkeySET NW Inap SET NW PWSH NW Inap SET NW RealmSET NW Wpagroup SH NW WpaautoSH NW Wpagroup SET NW WpapskSET NW DFS SH NW Iroam NW IroamSH NW DFS SET NW REGDOMainSET NW Wired Port CommandsSerial Port Commands SH NW REGDOMainSet serial port flow control to NONE, XON/XOFF, CTS, or DSR SET Port S1 SPeedSet serial port parity to NONE, EVEN, ODD, MARK, or Space Sets the data bits on the serial portEnable or disable bidirectional mode User’s Guide Parallel Port CommandsSET Port P1 BIDir Shows Port parameters Sample outputEnable or disable PJL status initialization SET Port P1 Nbuf ENable DIsableCL Port port JOB USB Port Commands Server Information CommandsSET SERVEr DEscription SET SERVEr NAmeSET Snmp SETCOMM2 SET Snmp SETCOMM1SH Serial SH SERVEr CO SH SERVErSH Snmp SH VErsionService Commands SET Servi service name IP SET Servi service name FRSSET Servi service name NAme SET Servi service name POrtString Commands SET IP ACcess TCP/IP CommandsUser’s Guide SH STRing stringnum SH FILtersSET IP Chksum SET IP Http SET IP FTPSET IP LPD SET IP Tftp SET IP TCPSH IP Power Configuration CommandsUser’s Guide Firmware Update User’s Guide SH LOAd Shows the firmware update parameters Sample outputSET Default Other CommandsExit SH FreeSH Poweron SET PoweronSave Unprotect Netware CommandsSET Netw REscan SET Netw QServerSET Netw SErver CL Netw SErverEmail Printing Commands SET POP3 TImeout SET POP3 PAsswordSET Smtp ENable SET Smtp ADdressSH POP3 DLC / Netbeui CommandsSH Smtp SH DLCAppletalk Commands ExtendView Wireless Security ConfigurationKey Selection SH NW SET NW KEY# SET NW RTS SH NW Apden SH NW CERTCN2 SET NW Inap SH NW Wpagroup
Top Page Image Contents