Silex technology SX-200 user manual SET Poweron, SH Poweron, Save

User’s Guide

This command instructs the server to do a soft reset when the next exit command is executed.

INIT

SET PAssword

Sets the server access (read) password

SET PAssword <password> (default = “ACCESS”)

SET POWERON

Sets Power on delay

SET POWERON <delay-sec> default == 0 (no delay)

SH POWERON

Displays Power on delay in seconds

SET PROTect

Sets update password to the string given.

SET PROTECT <password> (default = <null>)

CL PROTect

Sets update password to <null>.

CL PROTECT

SAVE

This command saves the current configuration to non-volatile memory. Without this command, the configuration is not saved unless an “EXIT” command is performed.

SAVE

SH TEst

Sends the configuration data via ASCII to the serial port

Document #40182-420 Rev. A 65