MOUNTING HOLE DIMENSIONS
Figure 11 shows relative locations of the mounting holes. Careful attention should be made to the length of the mounting screws and the recommended torque to prevent damage to the enclosure; the maximum screw penetration is 5 mm. The mounting screw threads are M3 and the recommended torque is 0.5 Nm to 0.8 Nm.
Figure 11. Exterior Mounting Specifications
Underside Mounting Holes | Side Mounting Holes |
|
|
(4x) M3 Screws | (6x) M3 Screws |
|
|
Maximum Depth: 5.0mm | Maximum Depth: 5.0mm |
|
|
Maximum Torque: 0.8 Nm | Maximum Torque: 0.8 Nm |
|
|
ZeusIOPS | 69 |