Appendix E. Driver Error Messages
Error Message | Description and Action Required | |
| This message will be displayed once if any Map Descriptor in a configuration | |
EST3:#01 FYI. For an | file has an odd length. Old EST3 Panels (before 2002) simply do not | |
communicate if length is odd. | ||
Old EST3 Panel, Read | ||
This message can be ignored if it is new EST3 panel. But if it is old or | ||
MD length must be even. | ||
unknown, try making Map Descriptor having even length before contacting | ||
| technical support. | |
EST3:#02 Err. Read MD | Numbers of addresses to be read per request are limited. | |
length must > 0 and <= | ||
Edit configuration file to set Map Descriptor length within specified range.6 | ||
%d |
| |
EST3:#03 Err. Write MD | One Map Descriptor can write only 1 value. Change length to 16. | |
must have length = 1 |
| |
EST3: #04 Unknown | This message is printed if the FieldServer receives sequences that are not | |
Escape Sequence 1B | specified. Specified sequences are 1B 82, 1B 8D and 1B 9B. This message | |
%02X considered as | is for information only and can be ignored unless the data stored by the | |
%02X | FieldServer is invalid in which case, call Tech support. |
6Download the configuration file, make the necessary changes, upload to the FieldServer and cycle power to the FieldServer for the changes to take effect.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com