FieldServer FS-8700-39 instruction manual Hardware Connections, FieldServerP1

Page 4

FS-8700-39 EST3 Driver Manual	Page 4 of 21

3.Hardware Connections

EST3 ECP

TB2

FS-8915-10

Model 8051	FROM DB9F/M	EST3 ECP
Function		TB2
RX	Pin 2	TX 2
TX	Pin 3	RX 2
GND	Pin 5	COM 2

8917-03

FS-8915-10

Connect to one of the RS-232

Ports on the FieldServer

FieldServerP1

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Image 4

Contents Driver Manual FS-8700-39 EST3 ECP Applicability & EffectivityTable of Contents Required 3rd Party Configuration EST3 DescriptionProvided By the Supplier of 3rd Party Equipment Hardware ECP Type III with TextHardware Connections FieldServerP1Data Arrays Configuring the FieldServer as a EST3 ClientUINT16 Client Side Connection Descriptors Client Side Node DescriptorsEST3 EST1 EST3Driver Related Map Descriptor Parameters RDBC, Wrbc 3, WrbxPage Map Descriptor Example Appendix A.2. Setting up Multiple Parameters Appendix A.4. Report and Delta ServiceAppendix A. Driver Notes Appendix A.1. PanelMasks Appendix A.3. PriorityAppendix A.4.1. Example Configuration using Delta Mode only DaalarmDATEST1 DatroubleAppendix A.5.3. ESTTypesUpdate Appendix A.5. Optional Data ArraysAppendix A.5.1. Relay Confirmation State Appendix A.5.2. ESTTypesDAAppendix A.5.5. ESTReportType Appendix A.6. Object Types and Required Parameters PartitionAppendix A.7. Set Date and Time To Panel FS-8700-39 EST3 Driver Manual Appendix C. EST3 Data Format Appendix C.1. Input data format Page Appendix C.2. Output data format Appendix D. EST3 ECP Connection Statistics Appendix E. Driver Error Messages