Page 7 of 51 |
4.2.Client Side Connection Descriptions
| Section Title |
|
|
| Connections |
|
|
| Column Title | Function | Legal Values |
| Port | Specify which port the device is | |
|
| connected to the FieldServer |
|
| Protocol | Specify protocol used | Metasys_N2 |
| Baud* | Specify baud rate | 9600 |
| Parity* | Specify parity | None |
| Data_Bits* | Specify data bits | 8 |
| Stop_Bits* | Specify stop bits | 1 |
|
|
| |
| Handshaking* | Specify hardware handshaking | None |
| Poll _Delay* | Time between internal polls | 0 |
| Line_Drive_On* | Duration of RTS assert before | 0.001s |
| start of transmission | ||
|
|
| |
| Line_Drive_Off* | Duration of RTS assert after | 0.000s |
| end of transmission | ||
|
| ||
|
|
| |
| Example |
|
|
//Client Side Connections
Connections
Port, Protocol
R1, Metasys_N2
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)