FieldServer FS-8700-19 instruction manual Hardware Connections, Hardware Connection Tips / Hints

Page 5

FS-8700-19_Metasys_N2 Driver Manual

Page 5 of 51

3.Hardware Connections

FieldServer as a Client

3rd Party		FieldServer
System		FieldServer
System

N2 bus

N2 devices

FieldServer as a Server

NCM, N30 or

N2 bus

other N2 client

(408)-262-2299

MetasysN2

CONNECTION DIAGRAM

N2 devices

FieldServer

3rd Party

System


	BASE NAME:			DATE: 05/31/06
	FILE NAME: FS-8700-19			BY: MC

3.1.Hardware Connection Tips / Hints

When using the FS-X40 ensure that the FieldServer is connected to the network using one or both of the RS-485 ports marked R1 and R2. If more ports are required, P1-P8 may be used in conjunction with an RS-232-to-RS-485 converter.

When using the FS-X20, ensure that the serial port is configured as an RS-485 port. Refer to Appendix B.3 for more information.

Only one N2 Client may be connected to a N2 network. If the FieldServer is to act as a Client, ensure that no other Clients are connected to the same N2 network.

Note: Interceptor mode is no longer supported for this driver.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 5

Contents FS-8700-19 Metasys N2 Table of Contents Metasys N2 Description Required 3rd Party Software Required 3rd Party ConfigurationProvided by the Supplier of 3rd Party Equipment Hardware Hardware Connection Tips / Hints Hardware ConnectionsData Arrays/Descriptors Configuring the FieldServer as a Metasys N2 ClientClient Side Connection Descriptions Client Side Node Descriptors AI, AO, DI, do Object Configuration VMA Map Descriptor Parameters ADF ADI Timing Parameters 2.3. DX9100 Map Descriptor ParametersMap Descriptor Example 2 VMA Map Descriptor Example 1 N2OpenDAAO3 Wrbx Map Descriptor Example 3 DX9100Server Side Connection Descriptors Configuring the FieldServer as a Metasys N2 ServerServer Side Node Descriptors Driver Specific Map Descriptor Parameters Map Descriptor Example FS-8700-19MetasysN2 Driver Manual Appendix A.2. Managing Analog Inputs and Outputs for DX9100 Appendix B.3. Tip on Overrides Appendix B.2. Offline BehaviorFS-8700-19MetasysN2 Driver Manual FS-8700-19MetasysN2 Driver Manual Appendix C.2. Hardware connections Appendix C.3. Configuration SettingsFS-8700-19MetasysN2 Driver ManualPage 26 SUP UnitMNT DiagPmopt PmtypPMF1 PMF2PMK33 PMK32PMK34 PMOU1DO@ DOTFB@ DOF@XTLOA6 XTHIA6XTHIA7 XTLOA7FS-8700-19MetasysN2 Driver Manual DEC HEX Appendix D.2. Metasys DC9100 Memory MapTYPE1 TYPE3 TYPE6 TYPE8 LR1 HR1HR2 LR2OSZT@ OsoptOSOT@ OSSP@Appendix D.3. Metasys TC9100 Memory Map ROS DO6 Triac DO7 DO1 DO2Mods ModtRAS LSCIAS AFMPM5K2 PM5TYPPM5K3 PM5K4OCN4 OCO3OCO4 OCN5TCS3 TCS2TCS1 HDW1FTC1 LRI1OFS1 IOP1FSP FT@Fdif LOODST2 DST1DST3 DST4DST7 DST5DST6 Error Message Description and Action Appendix E. Error MessagesThis page Intentionally Left Blank