Page 8 of 51 |
4.3.Client Side Node Descriptors
| Section |
|
|
|
|
|
| |
| Title |
|
|
|
|
|
| |
| Nodes |
|
|
|
|
|
| |
| Column |
|
| Function |
|
| Legal Values |
|
| Title |
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Up to 32 | |
| Node_Name | Provide name for node |
| alphanumeric | ||||
|
|
|
|
|
|
| characters | |
| Node_ID | Station address of physical Server node |
| |||||
| Protocol |
| Specify protocol used | Metasys_N2 | ||||
| Connection |
| Specify which port the device is connected to the |
| ||||
|
|
|
| FieldServer |
|
|
| |
|
|
|
| Identify type of device |
|
|
| |
|
|
|
| If this parameter is omitted the driver treats the |
|
|
| |
|
|
|
| configuration as a N2Open configuration and marks |
|
|
| |
|
|
|
| the Node_Type as N2OpenClient when using Ruinet |
| N2OpenClient, | ||
| Node_Type |
| to check the Node parameters. |
| DX9100, VMA, | |||
|
|
|
|
|
|
| N2Open | |
|
|
|
| If the Node_Type is specified as N2Open then the |
|
|
| |
|
|
|
| driver still acts as N2 Open configuration but some |
|
|
| |
|
|
|
| legacy port expander functionality used in some |
|
|
| |
|
|
|
| legacy advanced configuration is enabled. |
|
|
| |
| Example |
|
|
|
|
|
| |
//Client Side Nodes
Nodes |
|
|
|
|
Node_Name, | Node_ID, | Protocol, | Connection, | Node_Type |
PLC 1, | 1, | Metasys_N2, | P8, | VMA |
4.4.Client Side Map Descriptors
4.4.1.FieldServer Related Map Descriptor Parameters
Column Title | Function | Legal Values | |
Map_Descriptor_Name | Name of this Map | Up to 32 alphanumeric | |
Descriptor | characters | ||
| |||
| Name of Data Array | One of the Data Array names | |
Data_Array_Name | where data is to be | from “Data Array” section | |
| stored in the FieldServer | above | |
Data_Array_Offset | Starting location in Data | 0 to maximum specified in | |
Array | “Data Array” section above | ||
| |||
Function | Function of Client Map | RDBC, WRBC, WRBX | |
Descriptor | |||
|
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)