| Driver Manual |
Read/ | COMMAND NAME |
Write/ |
|
Both |
|
bREAD AND CLEAR PEAK
OPTO22_FORMAT | MASTER LENGTH | NOTES |
OPTION | CONSIDERED (See |
|
| Notes) |
|
affected by command.
3Only specified module positions get read and cleared. Data read gets put in corresponding positions of data array.
r | CALCULATE OFFSETS | 1 | Only specified module positions get |
|
|
| calculated and read. Data read gets |
|
|
| put in corresponding positions of data |
|
|
| array. |
w | SET OFFSETS | 1 | Only specified module positions get |
|
|
| written. Data written gets extracted |
|
|
| from corresponding positions of data |
|
|
| array. |
r | CALCULATE AND SET OFFSETS | 1 | Only specified module positions get |
|
|
| calculated and read. Data read gets |
|
|
| put in corresponding positions of data |
|
|
| array. |
r | CALCULATE GAIN COEFFICIENTS | 1 | Only specified module positions get |
|
|
| calculated and read. Data read gets |
|
|
| put in corresponding positions of data |
|
|
| array. |
w | SET GAIN COEFFICIENTS | 1 | Only specified module positions get |
|
|
| written. Data written gets extracted |
|
|
| from corresponding positions of data |
|
|
| array. |
r | CALCULATE AND SET GAIN | 1 | Only specified module positions get |
|
|
| calculated and read. Data read gets |
|
|
| put in corresponding positions of data |
|
|
| array. |
w | SET OUTPUT WAVEFORM R | 4 | Uses opto22_modifier1/2 from the |
|
|
| CSV file set waveform rates and |
|
|
| types. Only specified positions get |
|
|
| affected. 2 elements of data array |
|
|
| are used. |
w | IMPROVED OUTPUT WAVEFORMS | 4 | Uses opto22_modifier1/2 from the |
|
|
| CSV file set waveform rates and |
types. Only specified positions get affected. 3 elements of data array are used.
Notes on how the Length parameter is used in the CSV file.
1.The length parameter is always considered.
2.The length parameter is only considered when the keyword Bit is used in the opto22_format parameter.
3.The length is only used using the address/length method to specify module positions or when the dynamic method is used to specify module positions.
4.The length is never considered.
FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408)
Visit our website: www.fieldserver.com
Page 24