FieldServer FS-8700-17 instruction manual Client Side Connections, Client Side Nodes

FS-8700-17 Optomux Driver Manual

4.2Client Side Connections

Section Title
Connections
Column Title	Function	Legal Values
Port	Specify which port the device is	R1-R2, (FS-X40 Series)
	connected to the FieldServer	R1 (FS-X20 Series)
Baud*	Specify baud rate	110 – 115200, standard baud
		rates only
		At the time of publication of this
		manual the OPTO22 device’s
		support standard baud Rates in
		the range 300-38400.
Parity*	Specify parity	Even, Odd, None, Mark, Space
Data_Bits*	Specify data bits	7, 8
Stop_Bits*	Specify stop bits	1
Protocol	Specify protocol used	Optomux
Handshaking*	Specify hardware handshaking	RTS, RTS/CTS, None
Poll Delay*	Time between internal polls	0-32000 seconds
		default 1 second
Example

//Client Side Connections

Connections

Port, Baud, Parity, Protocol, Handshaking, Poll_Delay

R1, 9600, None, Opto22 , None , 0.100s

4.3 Client Side Nodes

Section Title
Nodes
Column Title	Function	Legal Values
Node_Name	Provide name for node	Up to 32 alphanumeric
		characters
Node_ID	OPTO22 device address.	0-255
Protocol	Specify protocol used	Optomux
Port	Specify which port the device is	R1-R2, (P1-P8 with a
	connected to the FieldServer	converter)

Example

//Client Side Nodes

Nodes

Node_Name, Node_ID, Protocol, Port

Optomux1 , 1 , Optomux , R1

FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 5