FieldServer instruction manual FS-8700-17 Optomux

Page 1

A Sierra Monitor Company

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8700-17 Optomux

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after January 1, 1999

Instruction Manual Part Number FS-8700-01

2/18/2004

Rev: 1.2

Image 1

Contents FS-8700-17 Optomux Table of Contents Optomux Driver Description Optomux System Driver Scope of SupplyFS-X40 Hardware ConnectionsData Arrays Configuring the FieldServer as a Optomux Driver ClientClient Side Nodes Client Side ConnectionsFieldServer Related Map Descriptor Parameters Client Side Map DescriptorsDriver Related Map Descriptor Parameters Bit, Packed Timing Parameters SET Time Delay Generate N Pulses Read and Average InputsDEVICE77STAT , Discinputs Map Descriptor Example 1 Read on/off StatusRead Status FS-8700-17 Optomux Driver Manual Read STATUS, Responsearr Map Descriptor Example 3 Command Response/Completion StatusDEVICE77STAT , Cntrposns Map Descriptor Example 4 Triggered ActionDEVICE77STAT , Anadata PULSE77 Timedata This example, module positions 1 and 5 are pulsedWrbc , DEV77 , 16 , 10.0s CLRLOW77 LowarrayConfiguring the FieldServer as a Optomux Server Driver Notes Command Response StatusDataArrayName, DABitName, DAByteName Module PositionsOptomux Commands FS-8700-17 Optomux Driver Manual Read Specified module positions get set Affected. The data period of pulses Only one module position may be Calculated and read. Data read gets Driver Stats Array Element ContentsRevision History