|
|
|
|
| Page 14 of 23 | |
C40_REP_NM_CONFIG, | Nm_Config, | 0, | RDBC, | PLC_01, | Report_NM_Config, | 16, |
Scan_Interval |
|
|
|
|
|
|
0s |
|
|
|
|
|
|
The above map descriptor will continuously execute the indicated host adapter command and will store the following parameter values in the data array “Nm_Config”:
Offset Parameter
0Dipswitch 1 and 2 settings
1Config flag ( 0 = Network Manager not configured, 1 = Network Manager configured )
2Option 01 configuration value
3Option 02 configuration value
4Option 03 configuration value
5Option 04 configuration value
6Option 05 configuration value
7Option 06 configuration value
8Option 07 configuration value
9Option 08 configuration value
10Option 09 configuration value
11Option 0A configuration value
12Option 0B configuration value
13Option 0C configuration value
14Option 0D configuration value
15Option 0E configuration value
4.4.6.5.Soft Reset
Forces the UNILINK Host Adapter to do a software reset.
Map_Descriptor_Name, | Data_Array_Name, Data_Array_Offset, | Function, | Node_name, | TIWAY_Host_Adapter_Cmd, | Length | |
C41_SOFT_RESET, | Cmd_Triggers, | 0, | AWT, | PLC_01, | Soft_Reset, | 1 |
The above map descriptor will execute the indicated host adapter command once every time a value is written to the data array “Cmd_Triggers” at offset 0.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)