Intermec PD4 manual Switching On the Printer

Page 26

Chapter 3—Starting Up

Switching On the Printer

Before switching on the printer, make the necessary connections, and check that the printhead is engaged (in the lower position).

Switch on the power using the On/Off switch on the rear plate. The green “Power” control lamp on the front panel lights up when the power is on. Wait for a few moments, while the printer starts up. Provided the printer is fitted with a display, the following message is shown:

The startup takes just a few seconds. The text line “Flash Checking” quickly disappears. You can now divert from the normal startup proce- dure by pressing the keys before the printer enters the Direct Mode.

•Press the Feed key for less than 3 seconds to print a test label (see later in this chapter).

•Press the Feed key for more than 3 seconds to go to the Dump Mode. Dump Mode means that the printer will print out the echo of the received ASCII data. Use this capability to debug your software when the printer does not perform as you expect. Also see Chapter 7, “Troubleshooting.”

•Press the Pause key to go to the Autosensing Mode, which is used to calibrate the label gap sensor and adjust the amount of media feed according to the distance between gaps between labels, detection slots in continuous stock, or black marks at the back of the media web. Also see Chapter 9, “Adjustments.”

•If you simultaneously press the Cancel and Pause keys, you will go to the Download Mode, which is used for service purposes only. You can only exit the Download Mode by sending a Reset command (^@) or rebooting the printer.

If you take none of the actions described above, the printer will enter the Direct Mode, which is indicated in the display window:

16

Intermec EasyCoder PD4—User’s Guide

Page 25 Page 27
Image 26
Page 25 Page 27
Contents EasyCoder PD4 Bar Code Label Printer Page FCC Notice United States of America EMS and EMI Compliance StatementIntermec EasyCoder PD4-User’s Guide Contents Loading Media TroubleshootingAdjustments Maintaining the PrinterTechnical Data Media SpecificationsSafety Summary Before You BeginSafety Icons Related Documents Global Services and SupportWarranty Information Web Support Telephone Support Introduction Description of EasyCoder PD4 Safety Warnings Product IdentificationIntroduction Installation Unpacking the Printer Front View Rear View Media Compartment Print Mechanism Computer PowerConnections Display Controls and IndicatorsControl Lamps Control KeysMode Feed key Pause key Cancel key Key FunctionsInstallation Starting Up Switching On the Printer Direct Mode Printing a Test Label Loading Media Tear-Off Straight-through Tear-Off, Flip the label feed guide upwardRotation of the roll Align the media with the center section Tear-Off, Peel-Off Self-strip Peel-Off, ScrewPeel-Off, Peel-Off, Thermal Transfer Printing Ribbon Load Ribbon Load, Ink outside the rollLoading Media Printing Controlling the Printing Key label in display Function in the Setup Mode Setup MethodsNavigating in the Setup Mode KeyDensity Setup Options Media TypeSetting review SpeedPrinting Intermec EasyCoder PD4-User’s Guide Printing Options Installation Instructions Stripper and Internal RewinderSwitch Rewinder cable Cutter Cutter connector Cutter cable Cable clips Options Troubleshooting Action Error HandlingDescription/Display Message Error Suggested action Printing stops Command errorsPrintout not in desired position Clearing Media Jam in Cutter Entering the Dump Mode Maintaining the Printer Printhead Cleaning Clean the printhead dot line External Cleaning Printhead Replacement Media Jams Cut off any damaged or wrinkled partAdjustments Printhead Balance Adjustment Engage the printhead and load the ribbonPrinthead Pressure Adjustment Printhead Dot Line Position Adjustment Adjustments Label Gap Sensor Position Adjustment Label Gap Sensor Calibration Ribbon Tension Adjustment Ribbon Shield Adjustment 1234567890Page For media load Intermec EasyCoder PD4-User’s Guide Technical Data Table of Technical Data Environment Power SupplyPhysical Measures ElectronicsData Interfaces Media Specifications Internal Roll Media Roll SizeCore Media Non-Adhesive StripSelf-Adhesive Strip ⇒ LinerSelf-Adhesive Labels ⇒ Label LengthSELF-ADHESIVE Labels Feed Direction Tickets with Gaps Tickets & Tags Feed Direction Tickets with Black Mark ⇒ Black Mark WidthTickets With Marks Feed Direction Interfaces Protocol DB-9 Signal MeaningRS-232 Interface Interface CableUSB Interface Parallel Interface Pin Function Transmitter CommentFirmware Upgrading Requirements InstructionsPage 960614-01

PD4 specifications

The Intermec PD4 is a compact and versatile thermal printer designed for high-performance label printing in demanding environments. Renowned for its reliability and speed, the PD4 is ideal for various applications, including shipping, inventory management, and retail labeling.

One of the standout features of the PD4 is its exceptional print speed, capable of producing up to 4 inches per second. This efficiency is crucial in environments where time is a critical factor. The printer supports a range of label sizes, accommodating various demands in different industries. With a maximum print width of 4 inches, it can handle labels that are suitable for shipping, warehousing, and product labeling with ease.

The PD4 utilizes both direct thermal and thermal transfer printing technologies, making it versatile for different materials. Direct thermal printing is typically used for short-term applications, while thermal transfer offers higher durability for labels exposed to various environmental conditions. This flexibility allows businesses to choose the printing method that best fits their specific requirements.

In terms of connectivity, the Intermec PD4 is equipped with multiple options, including USB, serial, and parallel interfaces, allowing it to easily integrate with existing systems. Additionally, it supports Ethernet connectivity for network printing, providing greater accessibility in a multi-user environment. These connectivity options ensure that the PD4 can be seamlessly deployed in both standalone and networked configurations.

Another notable characteristic is its user-friendly design. The printer features an intuitive control panel, making it easy for operators to manage print jobs and perform maintenance tasks. The open design of the printer also facilitates quick label loading and ribbon replacement, reducing downtime associated with label changes.

Moreover, the Intermec PD4 is built to withstand tough working conditions. Its robust construction is designed to handle the rigors of warehousing and industrial applications, ensuring longevity and consistent performance over time. With a compact footprint, it can fit into tight workspaces, making it a practical choice for businesses with limited available space.

In summary, the Intermec PD4 thermal printer stands out for its speed, versatility, and durability, making it an excellent choice for businesses that require reliable printing solutions. Its advanced technologies, user-friendly design, and strong connectivity options make it suitable for a wide range of label printing tasks, ensuring efficient operations across various industries.
Top Page Image Contents