|
| Appendix |
Tickets with Gaps |
|
|
⇐ a ⇒ Media Width |
|
|
Maximum: | 118.0 mm | (4.65 inches) |
Minimum: | 25.0 mm | (1.00 inches) |
⇐ b ⇒ Copy Length |
|
|
Maximum: |
|
|
8 dots/mm (203.2 dpi) | 1270 mm | (50 inches) |
11.81 dots/mm (300 dpi) | 558.8 mm | (22 inches) |
Minimum: |
|
|
8 dots/mm (203.2 dpi) | 5 mm | (0.2) inches) |
11.81 dots/mm (300 dpi) | 5 mm | (0.2) inches) |
⇐c ⇒ Detection Position
Variable: | 0 to 57 mm (0 to 2.24 inches) |
⇐d ⇒ Detection Slit Length
The length of the detection slit (excluding corner radii) must be mini- mum 2.5 mm (0.10 inches) on either side of the detection position (e).
⇐e ⇒ Detection Slit Height
Maximum: | 26.0 mm (1.02 inches) | |
Recommended: | 3.0 mm | (0.12 inches) |
Minimum: | 1.2 mm | (0.05 inches) |
Paper Type Setup
• Gap paper
Note: Do not allow any perforation to break the edge of the media as this may cause the media to split and jam the printer.
Intermec EasyCoder | 79 |