Intermec PD4 manual Connections, Power, Computer

Page 21

Chapter 2—Installation

Connections

Power

1Place the printer on a level surface, near an AC outlet. You should be

able to easily access the printer to load media and to remove the print- out.

2Both the printer and the host computer must be switched off while

they are being connected.

3Connect the power cord between the receptacle on the rear plate and to the electrical outlet (100 to 240 VAC).

Computer

The EasyCoder PD4 is fitted with one 36-pin Centronics socket for the parallel interface, one 9-pin D-style subminiature (DB9) socket for the RS-232 serial interface port and one class B connector for the USB inter- face port (see Appendix C).

Parallel Interface

Use the parallel interface with Intermec LabelShop or the Intermec Inter- Driver. The parallel port supports error signal and paper end signal.

RS-232 Serial Interface

Use the serial interface with Intermec LabelShop or the Intermec Inter- Driver. You can also use it for programming (see Intermec ESim v5.xx for EasyCoder PD4, Programmer’s Reference Manual). Before you can use the serial interface, you may need to set up the communication parameters, such as baud rate, parity, etc. as described in Chapter 5, “Printing.”

USB Interface

Use the USB interface with an USB-compatible version of the Intermec InterDriver for printing. The USB interface works in the same manner as RS-232 and is useful for error message handling (see Intermec ESim v5.xx for EasyCoder PD4, Programmer’s Reference Manual).

Intermec EasyCoder PD4—User’s Guide

11

Page 20 Page 22
Image 21
Page 20 Page 22
Contents EasyCoder PD4 Bar Code Label Printer Page EMS and EMI Compliance Statement FCC Notice United States of AmericaIntermec EasyCoder PD4-User’s Guide Contents Adjustments TroubleshootingLoading Media Maintaining the PrinterMedia Specifications Technical DataBefore You Begin Safety SummarySafety Icons Global Services and Support Warranty Information Web Support Telephone SupportRelated Documents Introduction Description of EasyCoder PD4 Product Identification Safety WarningsIntroduction Installation Unpacking the Printer Front View Rear View Media Compartment Print Mechanism Power ConnectionsComputer Control Lamps Controls and IndicatorsDisplay Control KeysKey Functions Mode Feed key Pause key Cancel keyInstallation Starting Up Switching On the Printer Direct Mode Printing a Test Label Loading Media Tear-Off Straight-through Flip the label feed guide upward Tear-Off,Rotation of the roll Align the media with the center section Tear-Off, Peel-Off Self-strip Screw Peel-Off,Peel-Off, Peel-Off, Thermal Transfer Printing Ribbon Load Ink outside the roll Ribbon Load,Loading Media Printing Controlling the Printing Navigating in the Setup Mode Setup MethodsKey label in display Function in the Setup Mode KeySetting review Setup Options Media TypeDensity SpeedPrinting Intermec EasyCoder PD4-User’s Guide Printing Options Stripper and Internal Rewinder Installation InstructionsSwitch Rewinder cable Cutter Cutter connector Cutter cable Cable clips Options Troubleshooting Error Handling Description/Display MessageAction Printing stops Command errors Error Suggested actionPrintout not in desired position Clearing Media Jam in Cutter Entering the Dump Mode Maintaining the Printer Printhead Cleaning Clean the printhead dot line External Cleaning Printhead Replacement Cut off any damaged or wrinkled part Media JamsAdjustments Engage the printhead and load the ribbon Printhead Balance AdjustmentPrinthead Pressure Adjustment Printhead Dot Line Position Adjustment Adjustments Label Gap Sensor Position Adjustment Label Gap Sensor Calibration Ribbon Tension Adjustment 1234567890 Ribbon Shield AdjustmentPage For media load Intermec EasyCoder PD4-User’s Guide Technical Data Table of Technical Data Physical Measures Power SupplyEnvironment ElectronicsData Interfaces Media Specifications Media Roll Size CoreInternal Roll Non-Adhesive Strip Media⇒ Liner Self-Adhesive Strip⇒ Label Length Self-Adhesive LabelsSELF-ADHESIVE Labels Feed Direction Tickets with Gaps Tickets & Tags Feed Direction ⇒ Black Mark Width Tickets with Black MarkTickets With Marks Feed Direction Interfaces RS-232 Interface DB-9 Signal MeaningProtocol Interface CableUSB Interface Pin Function Transmitter Comment Parallel InterfaceFirmware Upgrading Instructions RequirementsPage 960614-01

PD4 specifications

The Intermec PD4 is a compact and versatile thermal printer designed for high-performance label printing in demanding environments. Renowned for its reliability and speed, the PD4 is ideal for various applications, including shipping, inventory management, and retail labeling.

One of the standout features of the PD4 is its exceptional print speed, capable of producing up to 4 inches per second. This efficiency is crucial in environments where time is a critical factor. The printer supports a range of label sizes, accommodating various demands in different industries. With a maximum print width of 4 inches, it can handle labels that are suitable for shipping, warehousing, and product labeling with ease.

The PD4 utilizes both direct thermal and thermal transfer printing technologies, making it versatile for different materials. Direct thermal printing is typically used for short-term applications, while thermal transfer offers higher durability for labels exposed to various environmental conditions. This flexibility allows businesses to choose the printing method that best fits their specific requirements.

In terms of connectivity, the Intermec PD4 is equipped with multiple options, including USB, serial, and parallel interfaces, allowing it to easily integrate with existing systems. Additionally, it supports Ethernet connectivity for network printing, providing greater accessibility in a multi-user environment. These connectivity options ensure that the PD4 can be seamlessly deployed in both standalone and networked configurations.

Another notable characteristic is its user-friendly design. The printer features an intuitive control panel, making it easy for operators to manage print jobs and perform maintenance tasks. The open design of the printer also facilitates quick label loading and ribbon replacement, reducing downtime associated with label changes.

Moreover, the Intermec PD4 is built to withstand tough working conditions. Its robust construction is designed to handle the rigors of warehousing and industrial applications, ensuring longevity and consistent performance over time. With a compact footprint, it can fit into tight workspaces, making it a practical choice for businesses with limited available space.

In summary, the Intermec PD4 thermal printer stands out for its speed, versatility, and durability, making it an excellent choice for businesses that require reliable printing solutions. Its advanced technologies, user-friendly design, and strong connectivity options make it suitable for a wide range of label printing tasks, ensuring efficient operations across various industries.
Top Page Image Contents