Intermec PD4 manual Media Jams, Cut off any damaged or wrinkled part

Page 66

Chapter 8—Maintaining the Printer

Media Jams

Should a media jam occur in the print mechanism, proceed this way to clear it:

•Always switch off the power before starting to clear the jammed media.

•Raise the printhead and pull out the media.

•If the media has been wound up or has stuck on the platen roller, care- fully remove it by hand without using any sharp tools that can damage the delicate platen roller or printhead. Avoid rotating the platen roller.

If you must pull away the media by force causing the platen roller to rotate, it is very important that the power has been off for a minute or more. If not, the electronics can be dam- aged beyond repair.

•Cut off any damaged or wrinkled part.

•Check if there is any adhesive somewhere in the print mechanism, clean using a cleaning card or cotton swab soaked in isopropyl alcohol.

Isopropyl alcohol [(CH3)2CHOH; CAS 67-63-0] is a highly flammable, moderately toxic, and mildly irritating sub- stance.

•Reload the media as described in Chapter 4.

•Switch on the power.

•Readjust the media feed by pressing the Feed key.

56

Intermec EasyCoder PD4—User’s Guide

Page 65 Page 67
Image 66
Page 65 Page 67
Contents EasyCoder PD4 Bar Code Label Printer Page FCC Notice United States of America EMS and EMI Compliance StatementIntermec EasyCoder PD4-User’s Guide Contents Loading Media TroubleshootingAdjustments Maintaining the PrinterTechnical Data Media SpecificationsSafety Summary Before You BeginSafety Icons Global Services and Support Warranty Information Web Support Telephone SupportRelated Documents Introduction Description of EasyCoder PD4 Safety Warnings Product IdentificationIntroduction Installation Unpacking the Printer Front View Rear View Media Compartment Print Mechanism Power ConnectionsComputer Display Controls and IndicatorsControl Lamps Control KeysMode Feed key Pause key Cancel key Key FunctionsInstallation Starting Up Switching On the Printer Direct Mode Printing a Test Label Loading Media Tear-Off Straight-through Tear-Off, Flip the label feed guide upwardRotation of the roll Align the media with the center section Tear-Off, Peel-Off Self-strip Peel-Off, ScrewPeel-Off, Peel-Off, Thermal Transfer Printing Ribbon Load Ribbon Load, Ink outside the rollLoading Media Printing Controlling the Printing Key label in display Function in the Setup Mode Setup MethodsNavigating in the Setup Mode KeyDensity Setup Options Media TypeSetting review SpeedPrinting Intermec EasyCoder PD4-User’s Guide Printing Options Installation Instructions Stripper and Internal RewinderSwitch Rewinder cable Cutter Cutter connector Cutter cable Cable clips Options Troubleshooting Error Handling Description/Display MessageAction Error Suggested action Printing stops Command errorsPrintout not in desired position Clearing Media Jam in Cutter Entering the Dump Mode Maintaining the Printer Printhead Cleaning Clean the printhead dot line External Cleaning Printhead Replacement Media Jams Cut off any damaged or wrinkled partAdjustments Printhead Balance Adjustment Engage the printhead and load the ribbonPrinthead Pressure Adjustment Printhead Dot Line Position Adjustment Adjustments Label Gap Sensor Position Adjustment Label Gap Sensor Calibration Ribbon Tension Adjustment Ribbon Shield Adjustment 1234567890Page For media load Intermec EasyCoder PD4-User’s Guide Technical Data Table of Technical Data Environment Power SupplyPhysical Measures ElectronicsData Interfaces Media Specifications Media Roll Size CoreInternal Roll Media Non-Adhesive StripSelf-Adhesive Strip ⇒ LinerSelf-Adhesive Labels ⇒ Label LengthSELF-ADHESIVE Labels Feed Direction Tickets with Gaps Tickets & Tags Feed Direction Tickets with Black Mark ⇒ Black Mark WidthTickets With Marks Feed Direction Interfaces Protocol DB-9 Signal MeaningRS-232 Interface Interface CableUSB Interface Parallel Interface Pin Function Transmitter CommentFirmware Upgrading Requirements InstructionsPage 960614-01

PD4 specifications

The Intermec PD4 is a compact and versatile thermal printer designed for high-performance label printing in demanding environments. Renowned for its reliability and speed, the PD4 is ideal for various applications, including shipping, inventory management, and retail labeling.

One of the standout features of the PD4 is its exceptional print speed, capable of producing up to 4 inches per second. This efficiency is crucial in environments where time is a critical factor. The printer supports a range of label sizes, accommodating various demands in different industries. With a maximum print width of 4 inches, it can handle labels that are suitable for shipping, warehousing, and product labeling with ease.

The PD4 utilizes both direct thermal and thermal transfer printing technologies, making it versatile for different materials. Direct thermal printing is typically used for short-term applications, while thermal transfer offers higher durability for labels exposed to various environmental conditions. This flexibility allows businesses to choose the printing method that best fits their specific requirements.

In terms of connectivity, the Intermec PD4 is equipped with multiple options, including USB, serial, and parallel interfaces, allowing it to easily integrate with existing systems. Additionally, it supports Ethernet connectivity for network printing, providing greater accessibility in a multi-user environment. These connectivity options ensure that the PD4 can be seamlessly deployed in both standalone and networked configurations.

Another notable characteristic is its user-friendly design. The printer features an intuitive control panel, making it easy for operators to manage print jobs and perform maintenance tasks. The open design of the printer also facilitates quick label loading and ribbon replacement, reducing downtime associated with label changes.

Moreover, the Intermec PD4 is built to withstand tough working conditions. Its robust construction is designed to handle the rigors of warehousing and industrial applications, ensuring longevity and consistent performance over time. With a compact footprint, it can fit into tight workspaces, making it a practical choice for businesses with limited available space.

In summary, the Intermec PD4 thermal printer stands out for its speed, versatility, and durability, making it an excellent choice for businesses that require reliable printing solutions. Its advanced technologies, user-friendly design, and strong connectivity options make it suitable for a wide range of label printing tasks, ensuring efficient operations across various industries.
Top Page Image Contents