Intermec PD4 manual Table of Technical Data

Appendix A—Technical Data

Table of Technical Data

Printing

Print Technique	Direct Thermal/Thermal Transfer
Printhead Resolutions	8 dots/mm (203.2 dpi) or
	11.81 dots/mm (300 dpi)1
Print Speed (variable)	50.8 to 152.4 mm/sec. (2 to 6 in/sec.)	8 dots/mm
	50.8 to 101.6 mm/sec. (2 to 4 in/sec.)	11.81 dots/mm
Print Width	25 to 104 mm (1 to 4.09 in)	8 dots/mm
	25 to 106 mm (1 to 4.17 in)	11.81 dots/mm
Print Length (max)	1,270 mm (50 in)	8 dots/mm
	558.8 mm (22 in)	11.81 dots/mm
Print Directions	4
Media
Media Width	25 to 118.0 mm (1 to 4.65 inches)
Media Roll Diameter	212 mm (8.35 inches)
(max)
Media Roll Core Diameter	38.1 to 76.2 mm (1.5 to 3 in)
Media Thickness	60 µm to 250 µm (2.3 to 9.8 mils)
Transfer Ribbon
Material	Wax, hybrid, or resin
Winding	Ink on either inside or outside
Ribbon Width	30 to 110 mm (1.18 to 4.33 in)
Ribbon Roll Diameter	76 mm (2.99 in) equivalent to	At ribbon thick-
(outer)	450 m (1,471 ft) of ribbon	ness 8 µm
Inner Core Diameter	25.2 to 25.6 mm (1.00 inches)
Modes of Operation
Tear-Off (Straight-	Yes
through)
Peel-Off (Self-strip)	Optional
Cut-Off	Optional
Firmware
Operating System	ESim v5.xx
Latin Fonts	5 resident alphanumeric fonts.
	Windows bitmap fonts can be down-
	loaded.

70 Intermec EasyCoder PD4—User’s Guide