ACPI Suspend Type
This option is used to set the energy saving mode of the ACPI function. When you select “S1 (POS)” mode, the power will not shut off and the supply status will remain as it is. In S1 mode the computer can be resumed at any time. When you select “S3(STR)” mode, the power will be cut off after a delay period. The status of the computer before it enters STR will be saved in memory, and the computer can quickly return to the previous state when the STR function wakes. When you select “S1 & S3” mode, the system will automatically select the delay time.
C States Support
CPU power state selection
Soft-Off by PBTN
This option is used to set the power down method. This function is only valid for system using an ATX power supply.
When
When “Delay 4 Sec” is selected, press and hold the power button for four seconds to turn off power.
WOL(PME#) From Soft-Off
This item is used to set the system to
WOR(RI#) From Soft-Off
This item is used to set the system to
AMD Cool’n’Quiet
Use this option to enable or disable AMD Cool’n’Quiet™ Technology.
Power-on by Alarm
This item is used to set the timing of the
POWER ON Function
This option is used to set the power on method for your PC.
PnP/PCI Configurations
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 /
Page 39