EVGA 122-M2-NF59-AX Load Defaults, Set Password, Set User Name, Save & Exit Setup, Date, Time

Page 30

Load Defaults

Load the NVIDIA LinkBoost™ Technology settings for LinkBoost™ enabled systems. Load default system settings for standard systems.

Set Password

Set the password to access the BIOS menu.

Set User Name

Set the BIOS Welcome screen name.

Save & Exit Setup

Save settings and exit setup.

Exit Without Saving

Abandon all setting changes and exit setup.

Standard CMOS Features

This sub-menu is used to setup the standard CMOS features, such as the date, time, and HDD model. Use the arrow keys to select the item to setup, and then use the <PgUp> or <PgDn> keys to choose the setting values.

Date

This option allows you to set the desired date with the <month><date><year> format.

Time

This option allows you to setup the desired time with <hour><minute><second> format.

EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821

Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501

Page 29

Image 30

Contents Page Evga Nforce 590 SLI Motherboard CPU SupportTable of Contents Table of Contents Introduction of nForce 590 Motherboards Motherboard Features CPU Smart Fan Specifications CPU Socket AM2Layout Diagram & Jumper Settings JUMPERS, CONNECTORS, HEADERS, and Sockets Hardware Installation Hardware Installation Steps Cmos RAM Clear SettingInstall CPU Glossary About AMD Athlon64 AM2 CPUsInstall Memory Valid Memory ConfigurationsFor Dual Channel Memory Expansion Cards Procedure For Expansion Card Installation Assigning IRQs For Expansion CardInterrupt Request Table For This Motherboard PCI-Express SlotsFrom TOP to Bottom Standard Interrupt Assignments IRQSLI Bridge for Nvidia SLI Supported VGA Cards Page Connectors and Headers Power Connector 24-pin block Atxpwr PIN ROW1 ROW2ATX 12V Power Connector 8-pin block ATX12V PS/2 Mouse & PS/2 Keyboard Connector KBLAN Port connector UL1 MIC Pink CEN/LEF BlacknessFloppy drive Connector 34-pin block FDD Primary IDE Connector 40-pin block IDE1Pin Serial-ATA Port Connectors Serial-ATA Port SATA1 / SATA2 / SATA3/ SATA4/ SATA5 /SATAHeaders Line-Out/MIC Header for Front Panel 9-pin Audio AudioUSB Port Headers 9-pin USB1/USB2/USB3 Pwrled SpeakJW FP FAN Headers 3-pin CPUFAN, SYSFAN1 CD Audio-In Headers 4-pin CdinFirewire Connectors 1394A~B Supplemental SLI Power J2Starting Up Your Computer Beep MeaningAdvanced Bios Features Bios Description Enter Bios SetupStandard Cmos Features Advanced Chipset FeaturesSave & Exit Setup Load DefaultsSet Password Set User NameFloppy Drive a Halt OnMemory Network Boot Priority Advanced Bios Features Removable Device PriorityHard Disk Boot Priority Quick Power On Self TestLPC P2P P2P PCIe Bus, Slot Frequency Settings Ref Clock HTTCPU Multiplier SPP MCP Ref ClockCPU CKE base power down mode Memory Configuration Optimized for nForce MemDrive Strength setting CKE power down controlAdvance Memory Settings tRRD Memory Timings Standard Memory Settings Timing modeCommand Per Clock CMD Read delay from Rx FifoCS drive strength Dram driver weak modeCKE drive strength MA drive strengthUSB Config IDE Function SetupRAID Config MAC ConfigAcpi Suspend Type Power-on by AlarmPower on Function States SupportResources Controlled by Reset Configuration DataInit Display First IRQ ResourcesSystem Temperature ValuesPassword Disabled Press any key to continue… BoardSave to Cmos and Exit Y/N? Quit Without Saving Y/N?Nvidia Networking Guide Launching Nvidia Networking Configuring FirstPacket Enabling FirstPacketConfiguring TCP/IP Acceleration Configuring Teaming MediaShield RAID ManagerCreate RAID Arrays Configuration Options Setting Up a Custom ArrayCreating a Mirrored Array RAID configuration information appears, as shown in Figure View RAID ArraysDelete RAID Arrays Delete Array WizardDedicated Disk Setting Up a Spare RAID DiskFree Disk Assigning a Free DiskNvidia nTunre Starting nTuneAdjust Motherboard Settings Performance CategoryAdjust GPU Settings Dynamic Bios Access Tune SystemAdjust Custom Rules View System InformationPerform Stability Test Nvidia MonitorDriver Installation RAID InstallationPage Appendix Quick Debug Port Post CodesPage Page Page COPYRIGHTS, TRADEMARKS, Notices FCC Compliance InformationContacting Customer Service Useful InformationInformation to Keep Handy Before Calling