Echo EN55022 manual Router Management Screen General Keyboard Conventions

2.4Router Management

Selecting ROUTER MANAGEMENT from the main menu allows the user to configure the router. The router management screen is shown in Figure 5. Refer to Section 4 for details on each menu option.

+-------------------------------------------------------------------------------	+
ROUTER: S1234	EXIT
+-------------------------------------------------------------------------------	+
UNIT STATUS
TRAFFIC ANALYSIS
NETWORK LOADING
REMOTE MANAGEMENT
UNIT CONFIGURATION
SERVICE SETUP
FILTER SETUP
EVENTS

Figure 5 Router Management Screen

2.4.1 General Keyboard Conventions

The following keys are used to navigate the configuration screens for the router management.

￿

«

»

Moves the cursor block to the right Moves the cursor block to the left Moves the cursor block upwards Moves the cursor block downwards

<return> selects/initiates the highlighted option

2.4.2 Parameter Selection

When a command is selected from the command line using the cursor, pressing <return> will initiate action.

Some commands require the user to enter data. In Figure 6, a user has selected to ADD a new WAN IP filter. A new line has appeared allowing the user to enter the source IP address for the WAN filter. In this case, type in the required value using the keyboard and press <return>. Press <esc> to cancel any data entry operation

Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 11 of 59