CONTENTS
1 |
| INTRODUCTION | 6 |
1.1 |
| Functional Overview | 7 |
1.2 |
| Typical Applications | 7 |
2 |
| USE AND CONFIGURATION | 9 |
2.1 |
| Router Configuration | 9 |
2.2 |
| Supervisor Terminal Requirements | 9 |
2.3 |
| Router Terminal Display | 9 |
2.4 |
| Router Management | 11 |
2.4.1 | General Keyboard Conventions | 11 | |
2.4.2 | Parameter Selection | 11 | |
2.5 |
| Multiplexer Management | 13 |
2.5.1 | Allocating bandwidth to the Router | 13 | |
2.5.2 | Returning to the Main Menu Screen | 14 | |
2.5.3 | Clearing the Configuration back to Factory Default | 14 | |
2.6 |
| System Status | 14 |
2.6.1 | MAIN LINK CARRIER LOSS | 15 | |
2.6.2 | D/I CARRIER LOSS | 15 | |
2.6.3 | REMOTE ALARM | 15 | |
2.6.4 | Nx64 CHANNEL x CONTROL DISAFFIRMED | 15 | |
2.6.5 | Nx64 CHANNEL x CLOCK FAIL | 15 | |
2.6.6 | MAIN LINK HIGH BIT ERROR RATE | 15 | |
2.6.7 | LOCAL/REMOTE MAP MISMATCH | 15 | |
2.6.8 | D/I REMOTE ALARM | 15 | |
2.6.9 | ROUTER WAN LINK STATUS | 16 | |
3 |
| INSTALLATION | 17 |
3.1 |
| Opening the Multiplexer | 17 |
3.2 |
| Internal Link LK13 | 18 |
3.3 | Installing the Router Option | 18 | |
3.4 |
| Testing | 19 |
3.5 |
| Data Connections | 19 |
3.6 |
| Front Panel LEDs | 19 |
3.7 |
| Quick Configuration | 20 |
3.7.1 | Multiplexer Configuration | 20 | |
3.7.2 | Router Configuration | 20 | |
4 |
| ROUTER MENU OPTIONS | 23 |
4.1 |
| UNIT STATUS | 23 |
4.2 |
| TRAFFIC ANALYSIS | 24 |
4.2.1 | IP: ROUTING TABLE | 24 | |
4.2.2 | IP: ARP TABLE | 25 | |
4.2.3 | IPX: RIP TABLE | 26 | |
Echo LANlink Router Option User Manual | Issue 1.0 04 December 1997 Page 3 of 59 |