Echo EN55022 manual Node Address 48 bits, From SKT, All, To SKT, Server Name

This is the source IPX network number of the service. Services will not be entered into the internal SAP table if the RIP table has no entry for the route to this address.

Node Address (48 bits)

This is the Ethernet or Token Ring MAC address from where the SAP originated.

Hops (16 bits)

This is the number of Routers that must be traversed to reach this service. Every time this SAP passes another Router this count is incremented to a maximum of 16.

MENU SELECTION	DESCRIPTION
ADD	A new entry may be added to the end
	of the Table or after an entry
EDIT	To edit an entry, selecting the
	relevant line number entering
	required amendments.
DELETE	Enter the line number to delete.
CLEAR	To delete the entire table.
NAME	Define a name for this filter table

LIST PARAMETER	DESCRIPTION
LINE	The Line Number of the Filter Table
	entry used to specify an entry to be
	changed or deleted.
TYPE	The type of service advertised by a
	SAP packet or ALL to include all
	service types in the filter.
FROM SKT	Initial Socket Number for selecting a
	range of socket numbers to be
	filtered. To select all Sockets use
	ALL.
TO SKT	The final Socket Number for selecting
	a range of socket numbers to be
	filtered.
SERVER NAME	The unique name of a Server to be
	filtered or ALL to filter on all Server
	Names.
RSLT	The action to be taken as a result of
	SAP packets meeting filter conditions
	e.g. FAIL (drop) or PASS (route.)

Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 39 of 59