Copying photos
1Load photo paper with the glossy or printable side faceup. (If you are not sure which side is the printable side, then see the instructions that came with the paper.)
2Place a photo facedown on the scanner glass.
3From the printer control panel, press 
.
4Press 
until Photo Reprint appears.
5Press the arrow buttons to scroll to Yes, and then press 
.
6Press the arrow buttons to select the desired paper size, and then press 
.
7Press 
.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Enlarging or reducing images
1Load paper.
2Load an original document facedown on the scanner glass.
3From the printer control panel, press 
.
4Press 
until Resize appears.
5Press the arrow buttons until the setting that you want appears.
Notes:
•If you select Custom % Resize, then press 
, and then press the arrow buttons to select the desired custom percent value. Press 
to save the setting.
•If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on the paper size that you selected. For best results with this resize setting, use photo paper and set the paper type to Photo, or let the printer automatically detect the paper type.
6Press 
.
Note: After the copy job is finished, press 
to reset the settings to the default. The resize setting also switches to 100% after two minutes of printer inactivity.
Adjusting copy quality
1Load paper.
2Load an original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, press 
.
4Press 
until Quality appears.
Copying
46