Using Windows Me
NOTE: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.
You must install both a USB port driver and a custom print driver.
1Insert the Drivers and Utilities CD.
The Wizard automatically searches for the USB driver on the CD and installs it.
2After the USB port driver is found, click Finish.
3Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a printer driver.
4Select your printer and driver from the list on the screen, and then click OK. Use the following table to identify the driver for your language.
If your computer | Select the driver from the list |
uses this language |
|
| (Replace the D:\ in the table with the letter of |
| your |
|
|
English | D:\DRIVERS\WIN_9X\ENGLISH\LMPCL5C.INF |
French | D:\DRIVERS\WIN_9X\FRENCH\LMPCL5C.INF |
German | D:\DRIVERS\WIN_9X\GERMAN\LMPCL5C.INF |
Italian | D:\DRIVERS\WIN_9X\ITALIAN\LMPCL5C.INF |
Spanish | D:\DRIVERS\WIN_9X\SPANISH\LMPCL5C.INF |
5Click Next to install the printer driver.
6Click Next to complete installation.
7Use the default printer name (for example, Dell Laser Printer W5300) or type a unique name for your printer, and then click Next.
8Click Yes (recommended), and then click Finish to print a test page.
9After the test page prints, click Yes to close the window.
10Click Finish to complete the installation and close the wizard.
11Go to “Set up the queue on the print server” on page 19.
Set up for network printing
15