Dell 1501 owner manual Replace the memory module cover

1

2

1 memory module	2	securing clips
		(2 per connector)

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

4Ground yourself and install the new memory module:

a Align the notch in the module edge connector with the tab in the connector slot.

b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

1

2

1 notch 2 tab

5Replace the memory module cover.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

94

Adding and Replacing Parts