Dell M630 owner manual Usb

Page 108

Drives

Internal optional SD card

Optional vFlash card (with integrated iDRAC8

Enterprise)

Connectors

Front

USB

Internal

SD

One 4-pin, USB 2.0-compliant and one 4-pin, USB 3.0-compliant

Two internal SD cards dedicated for the hypervisor

One SD card dedicated for future vFlash support

Mezzanine Cards

Mezzanine slots	Two PCIe x8 Gen 3 slots mezzanine card
	supporting dual port 10 Gb Ethernet, quad port 1
	Gb, FC8 Fiber Channel, FC16 Fiber Channel, or
	Infiniband mezzanine cards.

Video

Video type	Matrox G200 VGA controller integrated with
	iDRAC
Video memory	2 GB shared with iDRAC application memory

Battery

NVRAM backup battery	CR 2032 3.0 V lithium coin cell

Environmental specifications

NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets.

Temperature
Storage	–40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950	10°C to 35°C (50°F to 95°F) with no direct
m or 3117 ft)	sunlight on the equipment.
Fresh air	For information on fresh air, see Expanded
	Operating Temperature section.
Maximum temperature gradient (operating and	20°C/h (36°F/h)
storage)

108

Image 108

Contents Dell PowerEdge M630 Page Contents Installing and removing blade components Troubleshooting your system Using System Diagnostics 102 Jumpers and connectors 104Technical specifications 107 Getting help 112 Front-panel features and indicators About your systemUsing USB diskette or USB DVD/CD drives Hard-drive/SSD indicator patternsIDRAC Direct LED indicator codes Hard-drive/SSD indicatorsIDRAC Direct LED indicator Documentation matrix Quick Resource Locator Setting up your system Setting up and configuring the iDRAC IP addressLogging in to iDRAC Installing the operating system Page About System Setup Navigation keysEntering System Setup System Setup Main MenuSystem Bios screen System Information screen System Memory screenProcessor Settings screen ATSSata Settings screen Post Page Boot Settings screen Network Settings screenIntegrated Devices screen Serial Communication screen 4GBSystem Profile Settings screen C1ESystem Security Settings screen Secure Boot Custom Policy Settings screen Miscellaneous Settings screen About Boot Manager About Dell Lifecycle Controller Changing the boot orderEntering Boot Manager Boot Manager main menuChoosing the system boot mode Assigning a system and/or setup passwordUsing your system password to secure your system Operating with a setup password enabled IDRAC Settings utilityEmbedded systems management Entering the iDRAC Settings utility Safety instructions Recommended toolsBefore working inside your system After working inside your systemRemoving and installing a blade Removing the bladeBlade cover O connector cover Installing a blade Removing or installing the bladeRemoving and installing the system cover Removing the system coverInstalling the system cover Inside the blade Inside the bladeCooling shroud Removing the cooling shroudInstalling the cooling shroud Processor/DIMM blankRemoving a processor/DIMM blank Installing a processor/DIMM blank Removing and installing a processor/DIMM blankSystem memory LrdimmProcessor General memory module installation guidelines Mode-specific guidelines Advanced ECC LockstepSample memory configurations Memory configurations two processors Removing memory modules Installing memory modules Removing the memory moduleMezzanine card installation guidelines Module mezzanine cardsRemoving and installing the mezzanine card Removing the mezzanine cardInstalling the mezzanine card Idsdm card optionalReplacing an SD card Internal USB key Replacing an SD cardReplacing the internal USB key Removing and installing the Idsdm card Removing the Idsdm cardInstalling the Idsdm card RSPI card optional Removing the rSPI cardInstalling the rSPI card SD vFlash cardReplacing the SD vFlash card Network Daughter Card Removing the Network Daughter CardNDC Installing the Network Daughter Card ProcessorsRemoving a processor Installing and removing a heat sink Processor shield opening and closing lever sequence Installing a processor Installing and removing a processorPage Applying thermal grease on the top of the processor Hard drive/SSD installation guidelines Hard drives/SSDsHard-drive/SSD bay numbering Removing and installing a hard drive/SSD Removing a hard drive/SSDInstalling a hard drive/SSD Removing a hard-drive/SSD blankHard-drive/SSD blank Release latch Installing a hard-drive/SSD blank Hard drive/SSD Removing a 1.8 inch SSD from a 1.8 inch SSD carrier Installing a 1.8 inch SSD in a 1.8 inch SSD carrier Removing the hard-drive/SSD cageHard-drive/SSD cage Screw Guide pin Installing the hard-drive/SSD cage Hard-drive/SSD backplaneRemoving the hard-drive/SSD backplane Page Removing and installing the 1.8 inch x4 SSD backplane Installing the hard-drive/SSD backplane System boardRemoving the system board Page Hex nut screw System board Screw Installing the system board Restoring the Service Tag using Easy Restore Entering the system Service Tag using System Setup Trusted Platform ModuleRe-enabling the TPM for BitLocker users Nvram backup battery Replacing the Nvram backup batteryReplacing the Nvram backup battery Storage controller card/PCIe extender card Removing the PCIe extender/storage controller cardPage Installing the PCIe extender/storage controller card Troubleshooting your system Troubleshooting hard drives Troubleshooting Solid State Drives Troubleshooting USB devicesTroubleshooting an internal SD card Troubleshooting processorsTroubleshooting the blade system board Troubleshooting the Nvram backup batteryDiagnostic messages System messagesAlert messages Dell Embedded System Diagnostics When to use the Embedded System DiagnosticsRunning the Embedded System Diagnostics Running embedded system diagnostics from an external media System diagnostic controlsJumpers and connectors System board jumper settingsSystem board connectors CPU1Disabling a forgotten password Technical specifications USB Per ISO 14644-1 with a 95% upper confidence 110 Enclosure can be installed with blade Locating your system Service Tag Contacting DellDocumentation feedback 113