Figure 10. Removing and installing a processor/DIMM blank
1. | processor/DIMM blank | 2. heat sink retention socket (4) |
3. | standoff (4) |
|
Next steps
1.Install the processor and the heat sink. See Installing a processor.
2.Ensure that you install the processor/DIMM blank when you have removed a processor permanently. See Installing a processor/DIMM blank.
3.Follow the procedure listed in After working inside your system.
Installing a processor/DIMM blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove processor/DIMM blank when installing two processors or to service other components inside the system.
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Your system does not have processor/heat sink installed.
44